Fang Liang
male, professor.
Research Field or the Direction
Wear Process Modelling, Materials of Tribology, Rapid Prototyping of Polystyrene, and Advanced Materials Processing
Job Resume
Fang Liang , earned his MSc and PhD degree, is a Prof, a member of editor board of TRIBOTEST (France), an editor member of Foundry Technology (China), a member of editor board of tribology (China), a member of Materials Failure Analysis Branch in Chinese Society for Metals, a member of Tibology Commission of Chinese Mechanical Engineering Society as well as a senior member of Chinese Mechanical Engineering. His major is Materials Science and Engineering.
Academic Activities
He has published over 50 papers in the world, 14 of which have been recruited by the SCI and 26 by the EI. One of his research projects has been awarded by the State Education Ministry in 1997. He got one activity participant award medal from the Chinese Mechanical Engineering Society, two awarded medals of excellent work from the State Key Laboratory of Solid Lubrication, Academia, Sinica, one silver medal of the State High Education Achievement and one golden medal of the State Excellent Textbook.
Company
Now, he is working in the state Key Laboratory of for Mechanical Behavior of Metals, Xian Jiaotong University.
Research Experience:
1981 -1984 Engaged with research on abrasive wear and fracture behavior of chromium family white cast iron
1984 -1991 Engaged with research on three-body abrasion theory
1991 -1997 Engaged with research on tribology of ceramics matched with cast iron funded by the State Natural Science Foundation and China-Ford Research Development Foundation
1997 -1998 Engaged with research on abrasive wear of hard metal and ceramics funded by the DTI in UK
1998 -2000 Engaged with research on tribological behavior of glassy phase in silicon nitride funded by the State Key Laboratory of Solid Lubrication, Academia, Sinica
2000 -2001 Engaged with research on effect of ceramics surface roughness on tribological properties funded by the DFG in Germany and also research on computer stochastic simulation of abrasive wear process funded by the State Education Ministry and the State Key Laboratory of Solid Lubrication, Academia, Sinica
2002 -Present Engaged with research on computer stochastic simulation of abrasive wear process funded by the State Education Ministry and the State Key Laboratory of Solid Lubrication, Academia, Sinica and also research on tribological behavior of biomaterial in Keio University, Japan.
Academy and Scientific Findings
Main Publishing Papers:
1. Fang Liang, Qichang Rao and Qingde Zhou, Abrasive Wear Resistance of Chromium Family of White Cast Irons, Proceedings International Conference on Wear of Materials, ASME£¬1987,733-741
2. Fang Liang£¬Qichang Rao and Qingde Zhou, Wear and Fracture of Cr-Family White Cast Irons, Acta Metallurgica, Sinica, 23(1987)B305-B310
3. Fang Liang, Qingde Zhou and Yaojun Li, An Explanation of the Relation Between Wear and Material Hardness in Three-Body Abrasion£¬Proceedings International Conference on Wear of Materials£¬ASME£¬1991,513-520 and Wear,151(1991)313-321
4. Fang Liang, Xianglong Kong and Qingde Zhou, A Wear Tester Capable of Monitoring and Evaluating the Movement Pattern of Abrasive Particles in Three-Body Abrasion, Wear,159(1992)1l5-120
5. Fang Liang, Xianglong Kong, Junyi Su and Qingde Zhou, Movement Patterns of Abrasive Particles in Three-Body Abrasion, Wear,162-164(1993)782-789
6. Fang Liang, Yimin Gao, Lin Zhou and Peng Li, Unlubricated Sliding Wear of Ceramics against Graphitized Cast Irons, Wear£¬171(1994)129-134
7. Lin Zhou£¬Fang Liang, N.X.Wang and J.E.Zhou, Unlubricated Sliding Mechanism of Fine Ceramic Si3N4 against High Chromium Cast Iron Tribology International, 27(1994)349-357
8. Fang Liang and Qingde Zhou, Statistical Model Describing Wear in Three-Body Abrasion Proceedings of China International Symposium for Symposium Tribologists 1992, 528-533 and Tribotest£¬2(1995)47-53
9. Fang Liang and Qingde Zhou,Temper Treatment and Residual Stress of High Chromium White Cast Iron£¬Materials for Mechanical Engineering, 11(1987)£¬No.4, 24-26,19
10. Lin Zhou£¬Fang Liang and J. E. Zhou, The Controlling Factor of the Formation of Transfer Film on Ceramic Surface During Unlubricated Sliding Contact against Metals, Tribotest, 3, lss.2(1996)167-177
11. Yimin Gao, Fang Liang, Junyi Su and Zhigao Xie, lnvestigation on the Components and the Formation of a Tribochemical in the Si3N4-Grey Iron Sliding Pair Lubricated with Distilled Water, Wear,206(1997)87-93
12. Fang Liang, Yimin Gao, Songhua Si and Qingde Zhou, Effect of Lubricants on the Friction and Wear of Al2O3 against Gray Cast Iron£¬Wear,210(1997)145-150
13. Fang Liang, Wanhong Zhang and Jimin Gong, Dynamic Analysis of Unbonded Sand During Filling for EPC, Int. J. Cast Metals Res., 10(1997)33-35
14. Lihong Zhou£¬Fang Liang and Yuaren Cai, Investigation of Invested Mold With High Strength and Thin Shell, Journal of Xian Jiaotong University£¬30(1996)116-122
15. Fang Liang, Yimin Gao and Qingde Zhou, Numerical Calculation of Grain Counter Shapes Applied to Abrasion, Tribology,l5(1995)348-354
16. Fang Liang£¬Yimin Gao, Songhua Si and Qingde Zhou, Effect of Graphitized Cast Iron Hardness on Wear of Ceramic£¬Wear£¬221(1998)55-60
17. Yimin Gao£¬Fang Liang and Junyi Su, The Effect of Tribofilm Formation on the Tribological Characteristics of Ceramic-Cast lron Sliding Pairs, Wear,210(1997)1-7
18. Yimin Gao£¬Fang Liang£¬Junyi Su and Xuewu Xu£¬An lnvestigation on Component and Formation of Tribochemical Film in Si3N4 White Iron Sliding Pair Lubricated with Distilled Water, Tribology lnternational, 30,lss.9(l997)693-700
19. Fang Liang, Qingde Zhou and Qingchang Rao, An Experimental Simulation of Cutting Wear in Three-Body Abrasion, Wear,218£¬Iss.1(1998)188-194
20. Fang Liang£¬Songhua Si, Yimin Gao and Qingde Zhou, Friction and Wear of Gray Cast lron against Si3N4 in EmuIsions, Lubrication Science, 3, Iss.3(1998)247-254
21. Fang Liang, Yimin Gao and Zhen Zhang, Tribology of Si3N4 with Different Glassy Phase Content Sliding against Grey Cast lron Lubricated with Wear, Wear225-229(1999)896-904
22. Xiaofeng Zhang and Fang Liang, The Effect of SFE on the Cavitation Erosion Resistance of Alpha Phase Aluminium Bronzes, Proceedings of 3th International Symposium on Tribo-Fatigue, Beijing, Oct. 2000, 442-447
23. U. Dulias, Fang Liang, K.-H. Zum Gahr, Effect of Surface Roughness of Self-Mated Alumina on Friction and Wear in Isooctane-Lubricated Reciprocating Sliding Contact£¬Wear£¬252 (2002) 351-358
24. Fang Liang, Jiandong Xing, Weimin Liu, Qunji Xue, Guoqing Wu and Xiaofeng Zhang, Computer Simulation of Two-Body Abrasion Processes, Wear, 251(2001)1356-1360
25. Fang Liang, Daoshan Du, Xiaofeng Zhang, Weimin Liu and Qunji Xue, Plastic Deformation Wear in Three-Body Abrasion, Journal of Xian Jiaotong University, 2003(2) Vol37: 111-114 (In Chinese)
26. Fang Liang£¬M. G. Gee£¬B. Roebuck£¬Abrasive Wear Properties of WC£¯Co Hard Metals, Tribology, V.20£¬No.6(2000)93£97 (Chinese)
27. Fang Liang£¬Daoshan Du, Xiaofeng Zhang, Weimin Liu and Qunji Xue, Computer Modelling of Plastic Deformation Wear Process in Three-Body Abrasion, Journal of Xian Jiaotong University, 37(No.3)(2003)268-272 ( In Chinese)
28. Guoqing Wu, Fang Liang, Jiandong Xing and Xiaofeng Zhang, Stochastic Modelling of Abrasive Wear Process Considering Effect of Grits Sizes, Journal of Xian Jiaotong University, 35(No.5)(2001)527-531 (in Chinese)
29. Xiaofeng Zhang, Fang Liang, Jiangdong Xing and Guoqing Wu, Relation of Two-Body and Three-Body Abrasion, Journal of Xian University of Highway and Transportation, 20(No.3)(2000)93-97 (In Chinese)
30. Guoqing Wu, Xiaofeng Zhang, Fang Liang and Jiandong Xing, 3D Stochastic Computer Simulation of Two-Body Abrasion, Tribology, 20(No.5)(2000)360-364 (In Chinese)
31. Shuhua Liang, Lei Xu, Fang Liang and Zhikang Fan, Effect of Vacuum In-Situ Internal Oxidation Parameters on Al2O3 Particles Forming, Powder Metallurgy Technology, 21,Issue3(2003)151-154 ( In Chinese)
32. Shuhua Liang, Lei Xu, Fang Liang and Zhikang Fan, Powders Preparation of Al2O3/CuComposite by Internal Oxidation, Powder Metallurgy Technology, 21£¬Issue4(2003)201-205 ( In Chinese)
33. Shuhua Liang, Zhikang Fan, Lei Xu, and Fang Liang, A Noval Procedure of Preparing In-Situ Al2O3/Cu Composite, Acta Materiae Compositae Sinica, 20£¬Issue3(2003)93-97 ( In Chinese)
34. Shuhua Liang, Zhikang Fan and Fang Liang, Effect of Powder Characteristic on Al Internal Oxidation to Prepare Al2O3-Cu Composite, Journal of Composite Materials, 38(1)(2004)31-39
Contact Way
28 West Xianning Road, Xian, 710049
Email: fangl@xjtu.edu.cn
Tel: 0086-29-82665479
Fax: 0086-29-82665479
