| 序号 |
作者 |
题名 |
刊名 |
卷 |
期 |
页 |
单位 |
年 |
| 1736 |
Zhang, Luteng (1); Zhang, Yapei (1); Zhao, Bo (2); Ma, Weimin (2); Zhou, Yukun (1); Su, G.H. (1); Tian, Wenxi (1); Qiu, Suizheng (1) |
COPRA: A large scale experiment on natural convection heat transfer in corium pools with internal heating |
Progress in Nuclear Energy |
86 |
|
132-140 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, No. 28, Xianning West Road, Xi'an, China; |
2016 |
| 1737 |
Xiao, Yunlong (1); Wu, Hongchun (1); Zheng, Youqi (1); Wang, Kunpeng (2) |
Neutronics studies on the feasibility of developing fast breeder reactor with flexible breeding ratio |
Journal of Nuclear Science and Technology |
53 |
1 |
129-138 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, No. 28, Xianning West Road, Xi'an, ShaanXi, China |
2016 |
| 1738 |
Yuan, Xianbao (1, 2); Cao, Liangzhi (1); Wu, Hongchun (1) |
Pre-conceptual study of small modular PbBi-cooled nitride fuel reactor core characteristics |
Nuclear Engineering and Design |
285 |
|
23-30 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, No. 28, Xianning West Road, Xi'an, Shanxi, China |
2015 |
| 1739 |
Lou, Lei (1); Cao, Liang-Zhi (1); Wu, Hong-Chun (1); Zheng, You-Qi (1) |
Conceptual core design of standing wave reactor with radial fuel shuffling scheme |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
48 |
3 |
401-406 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an 710049, China |
2014 |
| 1740 |
Kebwaro, Jeremiah Monari (1); Zhao, Yaolin (1); He, Chaohui (1) |
Evaluation of candidate materials for SCWR turbine and balance of plant shielding |
Progress in Nuclear Energy |
79 |
|
136-141 |
School of Nuclear Science and Technology, Xian Jiaotong University, Xian Shaanxi, China |
2015 |
| 1741 |
Kebwaro, Jeremiah Monari (1); Zhao, Yaolin (1); He, Chaohui (1) |
Design and optimization of HPLWR high pressure Turbine gamma ray shield |
Nuclear Engineering and Design |
284 |
|
293-299 |
School of Nuclear Science and Technology, Xian Jiaotong University, Xian, China |
2015 |
| 1742 |
Lu, Shuangying (1); Hu, Huasi (1); Hu, Guang (1); Liu, Bin (1) |
The expression revealing variation trend about radiation resistance of aromatic polymers serving in nuclear environment over absorbed dose |
Radiation Physics and Chemistry |
108 |
|
74-80 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1743 |
Wu, Pan (1); Shan, Jianqiang (1); Gou, Junli (1); Leung, Laurence K.H. (2); Zhang, Bin (1); Zhang, Bo (1) |
Heat transfer effectiveness for cooling of Canadian SCWR fuel assembly under the LOCA/LOECC scenario |
Annals of Nuclear Energy |
81 |
|
306-319 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1744 |
Guo, Daxi (1); He, Chaohui (1); Zang, Hang (1); Zhang, Peng (1); Ma, Li (1); Li, Tao (1); Cao, Xingqing (1) |
Re-evaluation of neutron displacement cross sections for silicon carbide by a Monte Carlo approach |
Journal of Nuclear Science and Technology |
53 |
2 |
161-172 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2016 |
| 1745 |
Liu, Yong (1); Cao, Liangzhi (1); Wu, Hongchun (1); Zu, Tiejun (1) |
Analysis of eigenvalue implicit sensitivity based on subgroup resonance self-shielding technique |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
87-90 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1746 |
Zheng, Youqi (1); Wu, Hongchun (1) |
Development of NECP-SARAX1.0 code for fast reactor physics calculation |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
116-118 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1747 |
Zheng, Youqi (1); Wu, Hongchun (1) |
Conceptual design of fast reactors based on once-through and closed fuel cycles |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
41-43 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1748 |
Zhou, Shengcheng (1); Wu, Hongchun (1); Zheng, Youqi (1); Li, Xunzhao (1) |
Sensitivity analyses of parameters in an accelerator driven minor actinide burner system |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
52-55 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1749 |
Du, Xianan (1); Wu, Hongchun (1); Zheng, Youqi (1) |
Application of monte carlo method in fast reactor assembly homogeneous constant calculation |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
67-70 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1750 |
Zhuang, Kun (1); Cao, Liangzhi (1); Zheng, Youqi (1); Wu, Hongchun (1) |
Development of neutron kinetic code for molten salt reactors |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
183-185 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1751 |
Yang, Chao (1); Cao, Liangzhi (1); Wu, Hongchun (1); Zu, Tiejun (1) |
Calculation of depletion sensitivity coefficient based on first-order generalized perturbation theory |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
91-93 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1752 |
Yuan, Xianbao (1, 2); Cao, Liangzhi (1) |
Analysis of neutronics characteristics of small modular Pb-Bi cooled reactor core with nitride fuel |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
38-40 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1753 |
Li, Zhipeng (1); Zheng, Youqi (1); Cao, Liangzhi (1) |
Study on long-life sodium cooled fast reactor concept with radial shuffling |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
44-47 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1754 |
Wang, Zhang-Li (1, 2); Su, Guang-Hui (1); Qiu, Sui-Zheng (1); Tian, Wen-Xi (1) |
Preliminary study on split coefficient matrix methodfor two-phase flow equation solving |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
6 |
1045-1050 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1755 |
Zhao, Yao-Lin (1); Wang, Hai (1, 2); Luo, Yong (1); Fu, Bao-Feng (1); Wu, Tao (2); He, Chao-Hui (1) |
Effect of humic acid on Re(VII) diffusion in GMZ bentonite |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
6 |
979-983 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1756 |
Tian, Chao (1); Zheng, Youqi (1); Li, Yunzhao (1); Li, Shuo (2); Chai, Xiaoming (3) |
Neutron transport study based on assembly modular ray tracing MOC method |
Hedongli Gongcheng/Nuclear Power Engineering |
36 |
3 |
157-161 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1757 |
Liu, Yong (1); Cao, Liang-Zhi (1); Wu, Hong-Chun (1); Zu, Tie-Jun (1) |
Eigenvalue sensitivity and uncertainty analysis based on classical perturbation theory |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
7 |
1247-1253 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1758 |
Gou, Junli (1); Shan, Jianqiang (1); Hu, Hongwei (1); Cao, Jianhua (2); Shen, Yonggang (2) |
Investigation on the thermalhydraulic characteristics of advanced accumulation tank |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
11 |
116-121 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1759 |
Wan, Cheng-Hui (1); Cao, Liang-Zhi (1); Wu, Hong-Chun (1); Zu, Tie-Jun (1); Shen, Wei (1, 2) |
Eigenvalue uncertainty analysis based on statistical sampling method |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
11 |
1954-1960 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1760 |
Wei, Ming-Zhe (1); Li, Yun-Zhao (1); He, Ming-Tao (1) |
Stiffness confinement method for space-time neutron kinetics calculation |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
10 |
1828-1832 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1761 |
Cao, Liangzhi (1, 2); Gerlach, Andrew (2); Xu, Yunlin (3); Downar, Thomas (2); Lee, John C. (2) |
Neutronics modeling of the SPERT III E-Core critical experiments with MPACT and KENO |
Annals of Nuclear Energy |
80 |
|
207-218 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1762 |
Guo, Daxi (1); Zang, Hang (1); He, Chaohui (1); Zhang, Peng (1); Li, Tao (1); Cao, Xingqing (1); Ma, Li (1) |
Preliminary studies on the emulation of 14 MeV neutron irradiation in SiC with heavy ions |
Fusion Engineering and Design |
100 |
|
274-279 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1763 |
Bo, Tao (1, 2); Lan, Jian-Hui (2); Zhao, Yao-Lin (1); Zhang, Yu-Juan (2); He, Chao-Hui (1); Chai, Zhi-Fang (2, 3); Shi, Wei-Qun (2) |
Surface properties of NpO2and water reacting with stoichiometric and reduced NpO2(111), (110), and (100) surfaces from ab initio atomistic thermod |
Surface Science |
644 |
|
153-164 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 1764 |
Xiang, Yan (1); Sun, Ducheng (1); Liu, Jianchang (1); Wu, Yingwei (1); Zhang, Peng (2); Qiu, Suizheng (1); Su, Guanghui (1) |
Experimental investigation on entrainment of fourth stage automatic depressurization system in AP1000 |
Hedongli Gongcheng/Nuclear Power Engineering |
36 |
4 |
98-102 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1765 |
Xiang, Yan (1); Sun, Du-Cheng (1); Zhang, Jing (1); Wu, Ying-Wei (1); Zhang, Peng (2); Qiu, Sui-Zheng (1); Su, Guang-Hui (1) |
Experimental investigation of ADS-4 entrainment in AP1000 with air-water |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
8 |
1380-1385 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1766 |
Xiang, Yan (1); Sun, Du-Cheng (1); Zhang, Jing (1); Liu, Jian-Chang (1); Wu, Ying-Wei (1); Zhang, Peng (2); Qiu, Sui-Zheng (1) |
Experimental investigation of tee branch entrainment with double gas inlets |
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology |
49 |
9 |
1586-1592 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1767 |
Zhang, Wenwen (1, 2); Ma, Zaiyong (1, 2); Zhang, Dalin (1, 2); Tian, Wenxi (1, 2); Qiu, Suizheng (1, 2); Su, G.H. (1, 2) |
Transient thermal-hydraulic analysis of a space thermionic reactor |
Annals of Nuclear Energy |
89 |
|
38-49 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, China; |
2016 |
| 1768 |
Kebwaro, Jeremiah Monari (1); Zhao, Yaolin (1); He, Chaohui (1) |
Investigation of photoneutron and capture gamma-ray production in Pb and W under irradiation from 16N decay radiation |
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materi |
358 |
|
32-37 |
School of Nuclear Science and Technology, Xian Jiaotong University, Xian, Shaanxi, China |
2015 |
| 1769 |
Zu, Tiejun (1); Wu, Hongchun (1); Zheng, Youqi (1); Cao, Liangzhi (1) |
Economics analysis of fuel cycle cost of fusion-fission hybrid reactors based on different fuel cycle strategies |
Fusion Engineering and Design |
90 |
|
119-126 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1770 |
Zheng, Youqi (1); Wu, Hongchun (1); Cao, Liangzhi (1) |
Stability analysis of CMFD acceleration for the wavelet expansion method of neutron transport equation |
Nuclear Engineering and Design |
254 |
|
142-147 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1771 |
He, Qingming (1); Cao, Liangzhi (1); Wu, Hongchun (1); Zu, Tiejun (1) |
Improved resonance calculation of fluoride salt-cooled high-temperature reactor based on subgroup method |
Annals of Nuclear Energy |
88 |
|
204-217 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2016 |
| 1772 |
Yuan, Yuan (1); Shan, Jianqiang (1); Zhang, Bin (1); Gou, Junli (1); Zhang, Bo (1); Lu, Tianyu (1); Ge, Li (1); Yang, Zijiang (1) |
Study on startup characteristics of heat pipe cooled and AMTEC conversion space reactor system |
Progress in Nuclear Energy |
86 |
|
18-30 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2016 |
| 1773 |
Huang, Kai (1); Wu, Hongchun (1); Cao, Liangzhi (1); Li, Yunzhao (1); Shen, Wei (2) |
Improvements to the Transmutation Trajectory Analysis of depletion evaluation |
Annals of Nuclear Energy |
87 |
|
637-647 |
School of Nuclear Science and Technology, Xi'An Jiaotong University, Xi'an, Shaanxi, China; |
2016 |
| 1774 |
Zu, Tiejun (1); Wu, Hongchun (1); Zheng, Youqi (1); Cao, Liangzhi (1) |
Burnup calculations and fuel cycle economics analysis of fusion-fission hybrid reactor |
Hedongli Gongcheng/Nuclear Power Engineering |
35 |
|
34-37 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an; Shaanxi, China |
2014 |
| 1775 |
Li, Xunzhao (1); Zhou, Shengcheng (1); Zheng, Youqi (1); Wang, Kunpeng (2); Wu, Hongchun (1) |
Preliminary studies of a new accelerator-driven minor actinide burner in industrial scale |
Nuclear Engineering and Design |
292 |
|
57-68 |
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an; Shaanxi, China |
2015 |
| 1776 |
Tang, Du (1); He, ChaoHui (1); Li, YongHong (1); Zang, Hang (1); Xiong, Cen (1); Zhang, JinXin (1) |
Soft error reliability in advanced CMOS technologies-trends and challenges |
Science China Technological Sciences |
57 |
9 |
1846-1857 |
School of Nuclear Science and Technology, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2014 |
| 1777 |
Pan, Xiaoyan (1); Dong, Jinyun (1); Shi, Yaling (1); Shao, Ruili (1); Wei, Fen (1); Wang, Jinfeng (1); Zhang, Jie (1) |
Discovery of novel Bcr-Abl inhibitors with diacylated piperazine as the flexible linker |
Organic and Biomolecular Chemistry |
13 |
25 |
7050-7066 |
School of Pharmacy, Health Science Center, Xi'an Jiaotong University, No. 76 Yanta West Road, Xi'an; Shaanxi Province, China |
2015 |
| 1778 |
Zhang, Jiye (1); Zhang, Peipei (2); Liu, Tingting (1); Zhou, Li (1); Zhang, Liqin (1); Lin, Rong (2); Yang, Guangde (1); Wang, Weirong (2); Li, Yiping (1) |
Solubility of naringin in ethanol and water mixtures from 283.15 to 318.15 K |
Journal of Molecular Liquids |
203 |
|
98-103 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, No. 76 Yanta Westroad, Xi'an, China |
2015 |
| 1779 |
Xie, Xiaoyu (1); Chen, Liang (1); Pan, Xiaoyan (1); Wang, Sicen (1) |
Synthesis of magnetic molecularly imprinted polymers by reversible addition fragmentation chain transfer strategy and its application in the Sudan |
Journal of Chromatography A |
1405 |
|
32-39 |
School of Pharmacy, Health Science Center, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1780 |
Xie, Xiaoyu (1); Pan, Xiaoyan (1); Han, Shengli (1); Wang, Sicen (1) |
Development and characterization of magnetic molecularly imprinted polymers for the selective enrichment of endocrine disrupting chemicals in wate |
Analytical and Bioanalytical Chemistry |
407 |
6 |
1735-1744 |
School of Pharmacy, Health Science Center, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1781 |
Xie, Xiaoyu (1); Wei, Fen (1); Chen, Liang (1); Wang, Sicen (1) |
Preparation of molecularly imprinted polymers based on magnetic nanoparticles for the selective extraction of protocatechuic acid from plant extra |
Journal of Separation Science |
38 |
6 |
1046-1052 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1782 |
Zhang, Jiye (1); Zhou, Li (1); Zhang, Peipei (1); Liu, Tingting (1); Yang, Guangde (1); Lin, Rong (2); Zhou, Jun (2) |
Extraction of polydatin and resveratrol from Polygonum cuspidatum root: Kinetics and modeling |
Food and Bioproducts Processing |
94 |
|
518-524 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1783 |
Zhang, Peipei (2); Cai, Shaona (1); Song, Li (3); Zhang, Liqin (1); Fan, Huihui (1); Zhou, Li (2); Lin, Rong (2); Yang, Guangde (1); Bian, Xiaoli (1); Wang, Weirong (4); Zh |
Solubility of dihydromyricetin in ethanol and water mixtures from 288.15 to 323.15 K |
Journal of Molecular Liquids |
211 |
|
197-202 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1784 |
Xie, Xiaoyu (1); Liu, Xia (1); Pan, Xiaoyan (1); Chen, Liang (1); Wang, Sicen (1) |
Surface-imprinted magnetic particles for highly selective sulfonamides recognition prepared by reversible addition fragmentation chain transfer po |
Analytical and Bioanalytical Chemistry |
408 |
3 |
963-970 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 1785 |
Dong, Kai (1); Dong, Yalin (2); You, Cuiyu (1); Xu, Wei (1); Huang, Xiaoyan (1); Yan, Yan (1); Zhang, Lu (1); Wang, Ke (1); Xing, Jianfeng (1) |
Assessment of the safety, targeting, and distribution characteristics of a novel pH-sensitive hydrogel |
Colloids and Surfaces B: Biointerfaces |
123 |
|
965-973 |
School of Pharmacy, Health Science Center, Xi'an Jiaotong University, Xi'an, Shaanxi, China |
2014 |
| 1786 |
Meng, Ge (1); Liu, Chunyan (1); Qin, Shidong (1); Dong, Mengshu (2); Wei, Xiaomi (1); Zheng, Meilin (1); Qin, Liwen (1); Wang, Huihui (1); He, Xiaoshuang (1); Zhang, Zhiguo |
An improved synthesis of sunitinib malate via a solvent-free decarboxylation process |
Research on Chemical Intermediates |
41 |
11 |
8941-8954 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1787 |
Meng, Ge (1); Zheng, Meilin (1); Dong, Mengshu (2); Gao, Yang (1); Zheng, Aqun (3); Li, Zhenyu (1); Hu, Ruizhi (1) |
Synthetic optimization of rosiglitazone and related intermediates for industrial purposes |
Research on Chemical Intermediates |
42 |
3 |
2023-2033 |
School of Pharmacy, Health Science Center, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2016 |
| 1788 |
Hou, Xiaofang (1); Sun, Meng (1); He, Xiaoshuang (1); Chen, Liang (1); Zhang, Ping (1); He, Langchong (1) |
Simultaneous quantification of five proteins and seven additives in dairy products with a heart-cutting two-dimensional liquid chromatography meth |
Journal of Separation Science |
38 |
22 |
3832-3838 |
School of Pharmacy, Xian Jiaotong University, 76 Yanta West Road, Xian, Shaanxi, China |
2015 |
| 1789 |
Hou, Xiaofang (1); Ma, Jing (1); He, Xiaoshuang (1); Chen, Liang (1); Wang, Sicen (1); He, Langchong (1) |
A stop-flow two-dimensional liquid chromatography method for determination of food additives in yogurt |
Analytical Methods |
7 |
5 |
2141-2148 |
School of Pharmacy, Xi'An Jiaotong University, 76 Yanta West Road, Xi'an, Shaanxi, China |
2015 |
| 1790 |
Luo, Zhimin (1); Du, Wei (1); Guo, Pengqi (1); Zheng, Penglei (1); Chang, Ruimiao (1); Wang, Jin (1); Zeng, Aiguo (1); Chang, Chun (1); Fu, Qiang (1) |
A porous hybrid imprinted membrane for selectively anchoring target proteins from a complex matrix |
RSC Advances |
5 |
89 |
72610-72620 |
School of Pharmacy, Xi'an Jiaotong University, 76 Yanta West Street, Xi'an, China |
2015 |
| 1791 |
Han, Shengli (1, 2); Zhang, Tao (1, 2); Li, Ting (1, 2); Kong, Liyun (1, 2); Lv, Yanni (1, 2); He, Langchong (1, 2) |
A sensitive HPLC-ECD method for detecting serotonin released by RBL-2H3 cells stimulated by potential allergens |
Analytical Methods |
7 |
20 |
8918-8924 |
School of Pharmacy, Xi'An Jiaotong University, 76# Yanta West Road, Xi'an, China; |
2015 |
| 1792 |
Han, Shengli (1); Huang, Jing (1); Cui, Ronghua (1); Zhang, Tao (1) |
Screening antiallergic components from Carthamus tinctorius using rat basophilic leukemia 2H3 cell membrane chromatography combined with high-perf |
Journal of Separation Science |
38 |
4 |
585-591 |
School of Pharmacy, Xi'an Jiaotong University, 76#, Yanta Westroad, Xi'an, China |
2015 |
| 1793 |
Sun, Meng (1); Hou, Xiaofang (1); Lin, Yuanyuan (1); Zhang, Jie (1); Wang, Sicen (1) |
An improved cell membrane chromatography method for the simultaneous screening of two epidermal growth factor receptor antagonists from radix scut |
Journal of Separation Science |
38 |
18 |
3145-3150 |
School of Pharmacy, Xian Jiaotong University, 76#, Yantan Westroad, Xian, China |
2015 |
| 1794 |
Chen, Jiangang (1); Nan, Guanjun (1); Yang, Rong (1); Zhang, Sanqi (1); Bian, Xiaoli (1); Yang, Guangde (1) |
Solubility of three types of benzamide derivatives in toluene, ethyl acetate, acetone, chloroform, methanol, and water at temperatures ranging fro |
Journal of Molecular Liquids |
204 |
|
137-146 |
School of Pharmacy, Xi'An Jiaotong University, No. 76 Yanta West Road, Xi'an, Shaanxi Province, China |
2015 |
| 1795 |
Wang, Ke (1); Dong, Kai (1); Yan, Yan (1); Xu, Wei (1); Zhang, Lu (1); Zhao, Guilan (1); Xing, Jianfeng (1) |
In vitro and in vivo study of a colon-targeting pH-sensitive hydrocortisone sodium succinate hydrogel |
RSC Advances |
5 |
98 |
80625-80633 |
School of Pharmacy, Xi'An Jiaotong University, Xi'an Shaanxi, China |
2015 |
| 1796 |
Zhang, Liqin (1); Song, Li (2); Zhang, Peipei (1); Liu, Tingting (1); Zhou, Li (1); Yang, Guangde (1); Lin, Rong (1); Zhang, Jiye (1) |
Solubilities of naringin and naringenin in different solvents and dissociation constants of naringenin |
Journal of Chemical and Engineering Data |
60 |
3 |
932-940 |
School of Pharmacy, Xian Jiaotong University, Xian, China |
2015 |
| 1797 |
Sun, Dong (1, 2); Wang, Sicen (1) |
Enhanced-oxidation and electrochemical determination of honokiol and magnolol using NMP-exfoliated graphene nanosheets |
Journal of Molecular Liquids |
208 |
|
52-57 |
School of Pharmacy, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1798 |
Kong, Wanjun (1); Sun, Rui (1); Gao, Yanjuan (1); Nan, Guanjun (1); Yang, Guangde (1); Li, Yiping (1) |
Dissociation Constants and Solubilities of Dalbergin and Nordalbergin in Different Solvents |
Journal of Chemical and Engineering Data |
60 |
9 |
2585-2593 |
School of Pharmacy, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1799 |
Sun, Dong (1, 2); Wang, Sicen (1) |
Highly sensitive electrochemical sensor for paeonol using NMP-exfoliated grapheme-modified electrode |
Ionics |
21 |
10 |
2905-2910 |
School of Pharmacy, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2015 |
| 1800 |
Wei, Zhao (1, 2); Yang, Jian Hai (1, 2); Liu, Zhen Qi (1, 2); Xu, Feng (2, 3); Zhou, Jin Xiong (4); Zr?nyi, Mikl?s (5); Osada, Yoshihito (6); Chen, Yong Mei (1, 2) |
Novel biocompatible polysaccharide-based self-healing hydrogel |
Advanced Functional Materials |
25 |
9 |
1352-1359 |
School of Science State Key Laboratory for Mechanical Behaviour of Materials, Collaborative Innovation Center of Suzhou Nano Science and Technology, Xi'An Jiaotong University, Xi'an; ShaanXi, China |
2015 |
| 1801 |
Li, Guijing (1, 2); Zhang, Xiaolong (1); Song, Xiaoping (1); Sun, Zhanbo (1); Feng, Wenjie (2) |
Preparation of nanoporous Ag@TiO2 ribbons through dealloying and their electrocatalytic properties |
Journal of Solid State Electrochemistry |
19 |
4 |
967-974 |
School of Science, Key Laboratory of Shaanxi for Advanced Functional Materials and Mesoscopic Physics, State Key Laboratory for Mechanical Behavior of Materials, Xi鈥檃n Jiaotong University, Xi鈥檃n, |
2015 |
| 1802 |
Wang, Fei (1); Cheng, Danfei (1); Wang, Wengang (1); Wang, Yuting (1); Zhao, Mingshu (1); Yang, Shengchun (1); Lu, Xuegang (1); Song, Xiaoping (1) |
In situ sodium chloride template synthesis of cobalt oxide hollow octahedra for lithium-ion batteries |
RSC Advances |
5 |
30 |
23326-23330 |
School of Science, Key Laboratory of Shaanxi for Advanced Functional Materials and Mesoscopic Physics, Xi'an Jiaotong University, Xi'an, ShaanXi, China |
2015 |
| 1803 |
Song, Yanyan (1); Wei, Caihua (1); Zhang, Xiaolong (1); Wei, Xin (1); Song, Xiaoping (1); Sun, Zhanbo (1) |
Nanoporous Pd/TiO2 composites prepared by one-step dealloying and their electrocatalytic performance for methanol/ethanol oxidation |
Materials Chemistry and Physics |
161 |
|
153-161 |
School of Science, Key Laboratory of Shaanxi for Advanced Functional Materials and Mesoscopic Physics, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1804 |
Yu, Xiaojing (1, 2); Shiraki, Tomohiro (2); Yang, Shengchun (1); Ding, Bingjun (1); Nakashima, Naotoshi (2, 3) |
Synthesis of porous gold nanoparticle/MoS<inf>2</inf>nanocomposites based on redox reactions |
RSC Advances |
5 |
105 |
86558-86563 |
School of Science, Key Laboratory of Shaanxi for Advanced Materials and Mesoscopic Physics, State Key Laboratory for Mechanical Behavior of Materials, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1805 |
Liu, Fuzhu (1); Wu, Chao (2); Yang, Guang (3); Yang, Shengchun (1, 4) |
CO Oxidation over Strained Pt(100) Surface: A DFT Study |
Journal of Physical Chemistry C |
119 |
27 |
15500-15505 |
School of Science, Key Laboratory of Shaanxi for Advanced Materials and Mesoscopic Physics, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1806 |
Ji, Chenchen (1); Ren, Haoqi (3); Yang, Shengchun (1, 2) |
Control of manganese dioxide crystallographic structure in the redox reaction between graphene and permanganate ions and their electrochemical per |
RSC Advances |
5 |
28 |
21978-21987 |
School of Science, Key Laboratory of Shanxi for Advanced Materials and Mesoscopic Physics, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1807 |
Tian, Cuifeng (1, 2); Li, Jiang (1); Ma, Chunsheng (1); Wang, Ping (2); Sun, Xiaohong (3); Fang, Jixiang (1) |
An ordered mesoporous Ag superstructure synthesized via a template strategy for surface-enhanced Raman spectroscopy |
Nanoscale |
7 |
29 |
12318-12324 |
School of Science, Key Laboratory of the Ministry of Education, Xi'an Jiaotong University, Shann xi, China |
2015 |
| 1808 |
Lu, R.E. (1); Chang, K.G. (1); Yang, S. (1); Yao, Y.G. (1); Fu, B. (1); Song, X.P. (1) |
Griffith phase-induced ferromagnetic diffuse phase transition |
Materials Research Innovations |
19 |
|
S9-S14 |
School of Science, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, Collaborative Innovation Center of Suzhou Nano Science and Technology, Xi'An Jiaotong University |
2015 |
| 1809 |
Tian, Fanghua (1); Zeng, Yuyang (1); Xu, Minwei (1); Yang, Sen (1); Lu, Tao (1); Wang, Jieqiong (1); Chang, Tieyan (1); Adil, Murtaza (1); Zhang, Yin (1); Zhou, Chao (1); S |
A magnetocaloric effect arising from a ferromagnetic transition in the martensitic state in Heusler alloy of Ni50Mn36Sb8Ga6 |
Applied Physics Letters |
107 |
1 |
|
School of Science, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, State Key Laboratory for Mechanical Behaviour of Materials, Xi'An Jiaotong University, Xi'an, Ch |
2015 |
| 1810 |
Sun, Shaodong (1) |
Recent advances in hybrid Cu2O-based heterogeneous nanostructures |
Nanoscale |
7 |
25 |
10850-10882 |
School of Science, MOE Key Laboratory for Non-Equilibrium Synthesis and Modulation of Condensed Matter, Xi'an Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1811 |
Chen, Zhao (1, 2); Wang, Xiaochi (1); Li, Hua (3); Li, Chao (4); Lu, Qinghua (2); Yang, Guang (4); Long, Jiangang (3); Meng, Lingjie (1) |
Controllable and mass fabrication of highly luminescent N-doped carbon dots for bioimaging applications |
RSC Advances |
5 |
29 |
22343-22349 |
School of Science, State Key Laboratory for Mechanical Behavior of Materials, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1812 |
Meng, Lingjie (1); Xu, Chengqiang (2); Liu, Tianhui (1); Li, Hua (3); Lu, Qinghua (2); Long, Jiangang (3) |
One-pot synthesis of highly cross-linked fluorescent polyphosphazene nanoparticles for cell imaging |
Polymer Chemistry |
6 |
16 |
3155-3163 |
School of Science, State Key Laboratory for Mechanical Behavior of Materials, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1813 |
Zheng, Wen Jiang (1); Gao, Jie (1); Wei, Zhao (1); Zhou, Jinxiong (2); Chen, Yong Mei (1) |
Facile fabrication of self-healing carboxymethyl cellulose hydrogels |
European Polymer Journal |
72 |
|
514-522 |
School of Science, State Key Laboratory for Mechanical Behaviour of Materials, Collaborative Innovation Center of Suzhou Nano Science and Technology, Xi'an Jiaotong University, Xi'an; Shaanxi, China |
2015 |
| 1814 |
Zheng, Wen Jiang (1); An, Ning (2); Yang, Jian Hai (1); Zhou, Jinxiong (2); Chen, Yong Mei (1) |
Tough Al-alginate/Poly(N -isopropylacrylamide) hydrogel with tunable LCST for soft robotics |
ACS Applied Materials and Interfaces |
7 |
3 |
1758-1764 |
School of Science, State Key Laboratory for Mechanical Behaviour of Materials, Xian Jiaotong University, Xi'an, China |
2015 |
| 1815 |
Wang, Daquan (1); Hu, Ying (2); Meng, Lingjie (1); Wang, Xiaochi (1); Lu, Qinghua (2) |
One-pot synthesis of fluorescent and cross-linked polyphosphazene nanoparticles for highly sensitive and selective detection of dopamine in body f |
RSC Advances |
5 |
112 |
92762-92768 |
School of Science, State Key Laboratory for Mechanical Behaviour of Materials, Xi'An Jiaotong University, Xi'an, China; |
2015 |
| 1816 |
Wang, Mei Xiang (1); Yang, Can Hui (2); Liu, Zhen Qi (1); Zhou, Jinxiong (2); Xu, Feng (3, 4); Suo, Zhigang (5); Yang, Jian Hai (1); Chen, Yong Mei (1) |
Tough photoluminescent hydrogels doped with lanthanide |
Macromolecular Rapid Communications |
36 |
5 |
465-471 |
School of Science, State Key Laboratory for Mechanical Behaviour of Materials, Xi'an Jiaotong University, Xi'an, Shaan Xi, China |
2015 |
| 1817 |
Liu, Zhen Qi (1, 2); Wei, Zhao (1, 2); Zhu, Xv Long (3, 4); Huang, Guo You (2, 5); Xu, Feng (2, 5); Yang, Jian Hai (1, 2); Osada, Yoshihito (6); Zr?nyi, Mikl?s (7); Li, Jia |
Dextran-based hydrogel formed by thiol-Michael addition reaction for 3D cell encapsulation |
Colloids and Surfaces B: Biointerfaces |
128 |
|
140-148 |
School of Science, Xi'an Jiaotong University, State Key Laboratory for Mechanical Behaviour of Materials, Collaborative Innovation Center of Suzhou Nano Science and Technology, Xi'an, China |
2015 |
| 1818 |
Wei, Xianqi (1); Zhu, Youzhang (2); Xia, Xianjun (1); Wang, Xiaoli (1, 2); Liu, Weihuan (2); Li, Xin (2) |
Carbon nanotube cathodes covered on the cylindrical surface of a fiber |
RSC Advances |
5 |
22 |
17049-17053 |
School of Science, Xi'An Jiaotong University, Xi'an Shaanxi, China |
2015 |
| 1819 |
Zuo, Zhao-Yu (1, 2) |
Displacement of X-ray binaries: Constraints on the natal kicks |
Astronomy and Astrophysics |
573 |
|
|
School of Science, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1820 |
Mu, Baoxia (1, 2); Cui, Xiuhua (2); Shen, Yifan (2); Dai, Kang (2) |
State-resolved collisional relaxation of highly vibrationally excited CsH by CO2 |
Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy |
148 |
|
299-310 |
School of Science, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1821 |
Lu, Shaojun (1, 2); Zhang, Chunmin (1) |
Adjustment of the parallelism of two mirrors for wide angle divided mirror michelson wind imaging interferometer |
International Journal on Smart Sensing and Intelligent Systems |
8 |
1 |
602-619 |
School of Science, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1822 |
Wang, Xing (1); Xu, Zhongfeng (1); Zhang, Limin (1) |
L X-ray intensity ratios for high Z elements induced with X-ray tube |
Radiation Physics and Chemistry |
112 |
|
121-124 |
School of Science, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1823 |
Ren, Xian-Yan (1, 2); Liu, Li-Hua (3); Li, Yu (1) |
Preparation and properties of carbon quantum dots-photoluminescence materials with magnetic resonance response |
Faguang Xuebao/Chinese Journal of Luminescence |
36 |
8 |
861-867 |
School of Science, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1824 |
Zhang, Kui (1); Wang, Xiangdong (1); Guo, Xiaoling (2); Dai, Jie (2); Xiang, Jingyu (1) |
Fast sol-gel method to prepare mesoporous tio2 with high photocatalytic activity |
Nano |
10 |
1 |
|
School of Science, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1825 |
Zhang, Chuang (1); Zhang, Chunmin (1) |
A switchable femtosecond and picosecond soliton fiber laser mode-locked by carbon nanotubes |
Laser Physics |
25 |
7 |
|
School of Science, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1826 |
Xiang, J. (1); Yin, Q. (1); Zhang, K. (1); Guo, X. (2); Wang, X. (1) |
Fabrication, structural morphology and photocatalytic activity of mesoporous TiO2 prepared by fast sol-gel method |
Materials Technology |
30 |
4 |
213-217 |
School of Science, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1827 |
Lu, Shaojun (1, 2); Zhang, Chunmin (1); Han, Jun (2) |
Research on measuring polarization state of light by Stokes parameters based on electro-optic effect |
|
54 |
13 |
4214-4220 |
School of Science, Xi'An Jiaotong University, Xi'an, Shaanxi, China; |
2015 |
| 1828 |
Wei, XianQi (1); Li, Xin (2); Liu, WeiHua (2); Wang, XiaoLi (1, 2) |
Laser tuned field emission of the carbon nanotube arrays grown on an optical fiber |
Science China Technological Sciences |
57 |
10 |
1936-1940 |
School of Science, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2014 |
| 1829 |
Adil, Murtaza (1); Yang, Sen (1); Mi, Meng (1); Zhou, Chao (1); Wang, Jieqiong (1); Zhang, Rui (1); Liao, Xiaoqi (1); Wang, Yu (1); Ren, Xiaobing (1); Song, Xiaoping (1); R |
Morphotropic phase boundary and magnetoelastic behaviour in ferromagnetic Tb1-xGdxFe2 system |
Applied Physics Letters |
106 |
13 |
|
School of Sciences, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1830 |
Zhu, Li (1); Yue, Aizhen (1) |
Routing health-oriented questions to appropriate doctors |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
48 |
12 |
57-62 and 13 |
School of Software Engineering, Xi'an Jiaotong University, Xi'an , China |
2014 |
| 1831 |
Du, Xiaozhi (1); Lu, Huimin (2); Rao, Yuan (1) |
Modeling and analyses of operational software system with rejuvenation and reconfiguration |
Advances in Intelligent Systems and Computing |
255 |
|
799-807 |
School of Software Engineering, Xian Jiaotong University, Xian, China |
2014 |
| 1832 |
Zhu, Ji-Hua (1); Zhou, Yi (2); Wang, Xiao-Chun (1); Han, Wen-Xin (1); Ma, Liang (1) |
Grid map merging approach based on image registration |
Zidonghua Xuebao/Acta Automatica Sinica |
41 |
2 |
285-294 |
School of Software Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1833 |
Liu, Pu (1); Wang, Yue (1); Lei, Wanjun (1) |
Submodule capacitor parameter design of modular multilevel converters to avoid system resonance |
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering |
35 |
7 |
1713-1722 |
School of the Electric Engineering, Xi'an Jiaotong University, Xi'an; Shaanxi Province, China |
2015 |
| 1834 |
Jiao, Bo (1); Yu, Yue (1); Dai, Yang (1); Hou, Xun (1); Wu, Zhaoxin (1) |
Improvement of light extraction in organic light-emitting diodes using a corrugated microcavity |
Optics Express |
23 |
4 |
4055-4064 |
Shaanxi Key Lab. of Information Photonic Technique, School of Electronicand Information Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1835 |
Song, Honglei (1); Yan, Lihe (1); Si, Jinhai (1); Hou, Xun (1) |
Optical limiter for ultrashort laser pulses baesd on ultrafast optical kerr effect |
Zhongguo Jiguang/Chinese Journal of Lasers |
42 |
2 |
|
Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic and Information Engineering, Xi'an Jiaotong University, Xi'an; Shaanxi, China |
2015 |
| 1836 |
Lang, Genfeng (1); Lin, Jing (1, 2); Liao, Yuhe (1, 3) |
Phase compensation method of holobalancing |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
50 |
22 |
16-21 |
Shaanxi Key Laboratory of Product Quality Assurance & Diagnosis, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1837 |
Tian, Feng (1, 2); Lan, Tian (1, 2); Chao, Kuo-Ming (3); Wu, Fan (1, 2); Zheng, Qinghua (1, 2); Gao, Pengda (1, 2) |
An Unbalanced Emotion Classification Method for Interactive Texts Based on Multiple-Domain Instance Transfer |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
4 |
67-72 |
Shaanxi Key Laboratory of Satellite and Terrestrial Network Technology Research and Development, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1838 |
Gong, Zhi-Na (1, 2); Yun, Feng (1, 2, 3); Ding, Wen (1, 2); Zhang, Ye (2); Guo, Mao-Feng (2); Liu, Shuo (3); Huang, Ya-Ping (1, 2); Liu, Hao (1, 2); Wang, Shuai (1, 2); Fen |
Increase in light extraction efficiency of vertical light emitting diodes by a photo-electro-chemical etching method |
Wuli Xuebao/Acta Physica Sinica |
64 |
1 |
|
Shaanxi Provincial Key Laboratory of Photonics & Information Technology, Key Laboratory of Physical Electronics and Devices of Ministry of Education, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1839 |
Liu, Hong (1, 2); Zhu, Jing-Ping (1); Wang, Kai (1) |
Modification of geometrical attenuation factor of bidirectional reflection distribution function based on random surface microfacet theory |
Wuli Xuebao/Acta Physica Sinica |
64 |
18 |
|
Shanxi Key Laboratory of Information Photonic Technique, School of Electronic and Information Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1840 |
Wu, Minshun (1); Liu, Zhiqiang (2); Chen, Degang (2) |
Extracting random jitter and sinusoidal jitter in ADC output with a single frequency test |
IEICE Electronics Express |
12 |
20 |
|
Shool of Electronics and Information Engineering, Xi’an Jiaotong University, China; |
2015 |
| 1841 |
Li, Jing (1); Qian, Xueming (1); Li, Qing (1); Zhao, Yisi (1); Wang, Liejun (2); Tang, Yuan Yan (3) |
Mining near duplicate image groups |
Multimedia Tools and Applications |
74 |
2 |
655-669 |
SMILES LAB at School of Electronics and Information Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2014 |
| 1842 |
Yang, Xiyu (1); Qian, Xueming (1); Xue, Yao (1) |
Scalable Mobile Image Retrieval by Exploring Contextual Saliency |
IEEE Transactions on Image Processing |
24 |
6 |
1709-1721 |
SMILES Laboratory, Xi'an Jiaotong Univeristy, Xi'an, China |
2015 |
| 1843 |
Zhu, Li (1); Yue, Aizhen (1); Zhou, Cong (1) |
A fast rendering method for 3D city building point cloud models |
Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphi |
27 |
8 |
1443-1451 |
Software Engineering School of Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1844 |
Yang, Qing (1); Du, Guangqing (1); Chen, Feng (1); Wu, Yanmin (1); Si, Jinhai (1); Hou, Xun (1) |
Ultrafast thermal relaxation characteristics in gold film excited by shaped femtosecond laser pulses |
Zhongguo Jiguang/Chinese Journal of Lasers |
41 |
5 |
|
State Key Lab for Manufacturing Sys Eng and Key Lab of Photonics Tech for Info of Shaanxi Province, School of Electronics and Information Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049 |
2014 |
| 1845 |
Chu, Huali (1); Wei, Zhengying (1); Yuan, Weijing (1); Zhou, Xing (1); Ma, Shengli (1) |
Fluid-structure interaction simulation and visualization experiments for pressure-compensating emitters |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
51 |
12 |
170-177 |
State Key Lab for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1846 |
Zhou, J.-P. (1, 2); Zhu, C.-G. (2); Xu, Y. (2) |
Surface integrity of Nickel-base superalloy by pulsed arc machining |
Materials Research Innovations |
19 |
|
94-98 |
State Key Lab for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1847 |
Li, X. (1); Li, D. (1); Lian, Q. (1); Guo, H. (1); Jin, Z. (1, 2) |
The effect of stem structure on stress distribution of a custom-made hip prosthesis |
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Med |
224 |
11 |
1275-1284 |
State Key Lab for Manufacturing System Engineering, Xi'An Jiaotong University, Xi'an, ShaanXi, China |
2010 |
| 1848 |
Gao, Zhi-Yong (1); Liang, Yin-Lin (1); Gao, Jian-Min (1); Jiang, Hong-Quan (1) |
State monitoring of complex electromechanical system based on integrated entropy of KPCA |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
5 |
1327-1333 |
State Key Lab for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1849 |
Zhang, Lufan (1); Long, Zhili (2); Cai, Jiandong (3); Luo, Fei (5); Fang, Jiwen (1); Wang, Michael Yu (3, 4) |
Multi-objective optimization design of a connection frame in macro-micro motion platform |
Applied Soft Computing Journal |
32 |
|
369-382 |
State Key Lab for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1850 |
Zhang, Lufan (1); Long, Zhili (2); Cai, Jiandong (3); Liu, Yang (3); Fang, Jiwen (1); Wang, Michael Yu (4) |
Active vibration isolation of macro-micro motion stage disturbances using a floating stator platform |
Journal of Sound and Vibration |
354 |
|
13-33 |
State Key Lab for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1851 |
Zhang, Chuancai (1); Guo, Qiang (1, 2); Zhang, Xinhua (1) |
Determination of the strain-free configuration of multispan cable |
Shock and Vibration |
2015 |
|
|
State Key Lab for Mechanical Structural Strength and Vibration, Xi'An Jiaotong University, Xi'an, Shannxi, China |
2015 |
| 1852 |
Lu, Tongqing (1); An, Le (1); Li, Jianguo (1); Yuan, Chao (1); Wang, T.J. (1) |
Electro-mechanical coupling bifurcation and bulging propagation in a cylindrical dielectric elastomer tube |
Journal of the Mechanics and Physics of Solids |
85 |
|
160-175 |
State Key Lab for Strength and Vibration of Mechanical Structures, Department of Engineering Mechanics, School of Aerospace Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1853 |
An, Le (1); Wang, Fangfang (1); Cheng, Sibo (1); Lu, Tongqing (1); Wang, T.J. (1) |
Experimental investigation of the electromechanical phase transition in a dielectric elastomer tube |
Smart Materials and Structures |
24 |
3 |
|
State Key Lab for Strength and Vibration of Mechanical Structures, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1854 |
Lu, Tongqing (1); Shi, Zhibao (1); Chen, Zhiqiang (1); Huang, He (1); Wang, T.J. (1) |
Current leakage performance of dielectric elastomers under different boundary conditions |
Applied Physics Letters |
107 |
15 |
|
State Key Lab for Strength and Vibration of Mechanical Structures, Department of Engineering Mechanics, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1855 |
Yi, Jun (1, 2); Liu, Heng (1, 2); Wang, Fengtao (1, 2); Li, Meng (1, 2); Jing, Minqing (1, 2) |
The resonance effect induced by the variable compliance vibration for an elastic rotor supported by roller bearings |
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamic |
228 |
4 |
380-387 |
State Key Lab for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, School of Mechanical Engineering, Xianning West Road, Xi'an, Shaanxi, China |
2014 |
| 1856 |
Hong, Ling (1); Jiang, Jun (1); Sun, Jian-Qiao (2) |
Response analysis of a forced duffing oscillator with fuzzy uncertainty |
Advances in Intelligent Systems and Computing |
288 |
|
3-13 |
State Key Lab for Strength and Vibration, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2014 |
| 1857 |
Liu, Zeng (1); Liu, Jinjun (1); Bao, Weihan (1); Zhao, Yalin (1) |
Infinity-norm of impedance-based stability criterion for three-phase AC distributed power systems with constant power loads |
IEEE Transactions on Power Electronics |
30 |
6 |
3030-3043 |
State Key Lab of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1858 |
Wang, Xinyu (1); Liu, Jinjun (1); Ouyang, Shaodi (1); Meng, Fei (1) |
Research on unbalanced-load correction capability of two power electronic transformer topologies |
IEEE Transactions on Power Electronics |
30 |
6 |
3044-3056 |
State Key Lab of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1859 |
Chen, Juan (1); He, Yingjie (1); Hasan, Saad Ul (1); Liu, Jinjun (1) |
A Comprehensive Study on Equivalent Modulation Waveforms of the SVM Sequence for Three-Level Inverters |
IEEE Transactions on Power Electronics |
30 |
12 |
7149-7158 |
State Key Lab of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1860 |
Zhou, Linyuan (1); Liu, Jinjun (1); Zhou, Sizhan (1) |
Improved Demagnetization Control of a Doubly-Fed Induction Generator under Balanced Grid Fault |
IEEE Transactions on Power Electronics |
30 |
12 |
6695-6705 |
State Key Lab of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1861 |
Liu, Jingcun (1); Zhang, Guogang (1); Dong, Jinlong (1); Wang, Jianhua (1) |
Study on miniaturized UHF antennas for partial discharge detection in high-voltage electrical equipment |
Sensors (Switzerland) |
15 |
11 |
29434-29451 |
State Key Lab of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an, China |
2015 |
| 1862 |
Wang, Jianhua (1); Zhang, Guogang (1); Geng, Yingsan (1); Song, Zhengxiang (1) |
The latest technology research and application prospects of the intelligent electrical apparatus |
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society |
30 |
9 |
1-11 |
State Key Lab of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1863 |
Xiong, Liansong (1); Zhuo, Fang (1); Liu, Xiaokang (1) |
Enhanced moving average filter and its applications in phase locking control of distorted power systems |
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society |
30 |
21 |
13-23 |
State Key Lab of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1864 |
Wei, Zhengying (1); Ma, Shengli (1); Zhou, Xing (1); Yuan, Weijing (1) |
Influence factors on hydraulic performance of pressure-compensating emitter |
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering |
31 |
15 |
19-25 |
State Key Lab. for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1865 |
Wang, Yifei (1); Cui, Jin (1); Yuan, Qibin (1); Niu, Yujuan (1); Bai, Yuanyuan (1); Wang, Hong (1) |
Significantly Enhanced Breakdown Strength and Energy Density in Sandwich-Structured Barium Titanate/Poly(vinylidene fluoride) Nanocomposites |
Advanced Materials |
27 |
42 |
6658-6663 |
State Key Lab. for Mechanical Behavior of Materials and Electronic Materials Research Laboratory, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1866 |
Bie, Zhaohong (1); Lin, Yanling (2) |
An Overview of Rural Electrification in China: History, technology, and emerging trends |
IEEE Electrification Magazine |
3 |
1 |
36-47 |
State Key Lab. of Electrical Insulation and Power Equip., Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1867 |
Wang, Xinyu (1); Liu, Jinjun (1); Ouyang, Shaodi (1); Xu, Taotao (1); Meng, Fei (1); Song, Shuguang (1) |
Control and experiment of an H-bridge-based three-phase three-stage modular power electronic transformer |
IEEE Transactions on Power Electronics |
31 |
3 |
2002-2011 |
State Key Lab. of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University, Xi'an, China |
2016 |
| 1868 |
Meng, Guodong (1); Cheng, Yonghong (1); Dong, Chengye (1); Wu, Kai (1) |
Experimental study on electrical breakdown for devices with micrometer gaps |
Plasma Science and Technology |
16 |
12 |
1083-1089 |
State Key Lab. of Electrical Insulation and Power Equipment, Xi'An Jiaotong University, Xi'an, China |
2014 |
| 1869 |
Xiong, Liansong (1); Zhuo, Fang (1); Wang, Feng (1); Liu, Xiaokang (1); Zhu, Minghua (1) |
A fast orthogonal signal-generation algorithm characterized by noise immunity and high accuracy for single-phase grid |
IEEE Transactions on Power Electronics |
31 |
3 |
1847-1851 |
State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China |
2016 |
| 1870 |
Zhang, Shiling (1); Peng, Zongren (1); Liu, Peng (1); Li, Naiyi (1) |
Design and dielectric characteristics of the ±1100 kV UHVDC wall bushing in china |
IEEE Transactions on Dielectrics and Electrical Insulation |
22 |
1 |
409-419 |
State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1871 |
Zhang, Han (1); Du, Zhaohui (1); Fang, Zuowei (1); Wang, Shibing (1); Chen, Xuefeng (1) |
Sparse decomposition based aero-engine's bearing fault diagnosis |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
51 |
1 |
97-105 |
State Key Laboratory for Manufacturing and System Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1872 |
Zhang, ChunLin (1); Li, Bing (1); Chen, BinQiang (2); Cao, HongRui (1); Zi, YanYang (1); He, ZhengJia (1) |
Weak fault signature extraction of rotating machinery using flexible analytic wavelet transform |
Mechanical Systems and Signal Processing |
64-65 |
|
162-187 |
State key laboratory for Manufacturing and Systems Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1873 |
Wang, Shuai (1); Zi, Yanyang (1); Wan, Zhiguo (1); Li, Bing (1); He, Zhengjia (1) |
Effects of multiple cracks on the forced response of centrifugal impellers |
Mechanical Systems and Signal Processing |
60 |
|
326-343 |
State Key Laboratory for Manufacturing and Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1874 |
Wang, Shuai (1); Wang, Yu (1); Zi, Yanyang (1); Li, Bing (1); He, Zhengjia (1) |
Reduced-order modeling for rotating rotor-bearing systems with cracked impellers using three-dimensional finite element models |
Journal of Sound and Vibration |
355 |
|
305-321 |
State Key Laboratory for Manufacturing and Systems Engineering, School of Mechanical Engineering, Xian Jiaotong University, Xi'an, China |
2015 |
| 1875 |
Wan, Zhiguo (1); Cao, Hongrui (1); Zi, Yanyang (1); He, Wangpeng (1); Chen, Yimin (1) |
Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears |
Mechanism and Machine Theory |
92 |
|
447-463 |
State Key Laboratory for Manufacturing and Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1876 |
He, Wangpeng (1, 2); Ding, Yin (2); Zi, Yanyang (1); Selesnick, Ivan W. (2) |
Sparsity-based algorithm for detecting faults in rotating machines |
Mechanical Systems and Signal Processing |
72-73 |
|
46-64 |
State Key Laboratory for Manufacturing and Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 1877 |
Wang, Shuai (1); Wang, Yu (1); Zi, Yanyang (1); He, Zhengjia (1) |
A 3D finite element-based model order reduction method for parametric resonance and whirling analysis of anisotropic rotor-bearing systems |
Journal of Sound and Vibration |
359 |
|
116-135 |
State Key Laboratory for Manufacturing and Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1878 |
Chen, Jinglong (1); Wang, Yu (1); He, Zhengjia (1); Wang, Xiaodong (2) |
Fault diagnosis of demountable disk-drum aero-engine rotor using customized multiwavelet method |
Sensors (Switzerland) |
15 |
10 |
26997-27020 |
State Key Laboratory for Manufacturing and Systems Engineering, Xi’an Jiaotong University, Xi’an, China; |
2015 |
| 1879 |
Zhou, Zichao (1); Wang, Yiqing (1); Wu, Wenwu (1); Hong, Jun (1) |
Thermally induced preload and stiffness calculation for machine tool spindle bearing |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
2 |
111-116 |
State Key Laboratory for Manufacturing and Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1880 |
Chen, Jinglong (1); Wan, Zhiguo (1); Pan, Jun (1); Zi, Yanyang (1); Wang, Yu (1); Chen, Binqiang (2); Sun, Hailiang (3); Yuan, Jing (4); He, Zhengjia (1) |
Customized maximal-overlap multiwavelet denoising with data-driven group threshold for condition monitoring of rolling mill drivetrain |
Mechanical Systems and Signal Processing |
68-69 |
|
44-67 |
State Key Laboratory for Manufacturing and Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 1881 |
Qu, Jinxiu (1); Zhang, Zhousuo (1); Gong, Teng (1) |
A novel intelligent method for mechanical fault diagnosis based on dual-tree complex wavelet packet transform and multiple classifier fusion |
Neurocomputing |
171 |
|
837-853 |
State Key Laboratory for Manufacturing and Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2016 |
| 1882 |
Chen, Jinglong (1); Li, Zipeng (1); Pan, Jun (1); Chen, Gaige (1); Zi, Yanyang (1); Yuan, Jing (2); Chen, Binqiang (3); He, Zhengjia (1) |
Wavelet transform based on inner product in fault diagnosis of rotating machinery: A review |
Mechanical Systems and Signal Processing |
70-71 |
|
1-35 |
State Key Laboratory for Manufacturing and Systems Engineering, Xi'An Jiaotong University, Xi'an, China; |
2016 |
| 1883 |
Zhang, Chunlin (1, 2); Harne, R.L. (3); Li, Bing (1); Wang, K.W. (2) |
Reconstructing the transient, dissipative dynamics of a bistable Duffing oscillator with an enhanced averaging method and Jacobian elliptic functi |
International Journal of Non-Linear Mechanics |
79 |
|
26-37 |
State Key Laboratory for Manufacturing and Systems Engineering, Xi'An Jiaotong University, Xi'an; Shaanxi, China; |
2016 |
| 1884 |
Meng, Xiangwei (1); Yang, Qing (1); Chen, Feng (1); Shan, Chao (1); Liu, Keyin (1); Li, Yanyang (1); Bian, Hao (1); Si, Jinhai (1); Hou, Xun (1) |
Three dimensional multilayer solenoid microcoils inside silica glass |
Optics and Laser Technology |
76 |
|
29-32 |
State Key Laboratory for Manufacturing System Engineering, Key Laboratory of Photonics Technology for Information of Shaanxi Province, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1885 |
Lu, Yu (1); Yang, Qing (1); Chen, Feng (1); Du, Guangqing (1); Wu, Yanmin (1); Ou, Yan (1); Hou, Xun (1) |
Ultrafast near-field enhancement dynamics in a resonance-mismatched nanorod excited by temporally shaped femtosecond laser double pulses |
Optics and Laser Technology |
77 |
|
6-10 |
State Key Laboratory for Manufacturing System Engineering, Key Laboratory of Photonics Technology for Information of Shaanxi Province, Xi'an Jiaotong University, Xi'an, China |
2016 |
| 1886 |
Hu, Yang (1); Yang, Qing (1); Chen, Feng (1); Bian, Hao (1); Deng, Zefang (1); Du, Guangqing (1); Si, Jinhai (1); Yun, Feng (1); Hou, Xun (1) |
Cost-efficient and flexible fabrication of rectangular-shaped microlens arrays with controllable aspect ratio and spherical morphology |
Applied Surface Science |
292 |
|
285-290 |
State Key Laboratory for Manufacturing System Engineering, School of Electronics and Information Engineering, Xi'An Jiaotong University, Xi'an, China |
2014 |
| 1887 |
Yong, Jiale (1); Yang, Qing (1); Chen, Feng (1); Du, Guangqing (1); Shan, Chao (1); Farooq, Umar (1); Wang, Jiuhong (1); Hou, Xun (1) |
Using an 'underwater superoleophobic pattern' to make a liquid lens array |
RSC Advances |
5 |
51 |
40907-40911 |
State Key Laboratory for Manufacturing System Engineering, School of Electronics and Information Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1888 |
Yong, Jiale (1); Chen, Feng (1); Yang, Qing (1); Du, Guangqing (1); Shan, Chao (1); Bian, Hao (1); Farooq, Umar (1); Hou, Xun (1) |
Bioinspired transparent underwater superoleophobic and anti-oil surfaces |
Journal of Materials Chemistry A |
3 |
18 |
9379-9384 |
State Key Laboratory for Manufacturing System Engineering, School of Electronics, Information Engineering, xi'An Jiaotong University, Xi'an, China |
2015 |
| 1889 |
Ardestani, Marzieh M. (1); Moazen, Mehran (2); Jin, Zhongmin (1, 3) |
Sensitivity analysis of human lower extremity joint moments due to changes in joint kinematics |
Medical Engineering and Physics |
37 |
2 |
165-174 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an JiaoTong University, Xi'an, Shaanxi, China |
2015 |
| 1890 |
Ardestani, Marzieh M. (1); Moazen, Mehran (2); Chen, Zhenxian (1); Zhang, Jing (1); Jin, Zhongmin (1, 3) |
A real-time topography of maximum contact pressure distribution at medial tibiofemoral knee implant during gait: Application to knee rehabilitatio |
Neurocomputing |
154 |
|
174-188 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1891 |
Zhang, L. (1); Xing, Y.F. (1); Qin, Y.-W. (1, 2); Zhong, H. (1); Chen, H. (3); Li, K.X. (1); Zhao, X. (1); Yao, N.L. (4) |
Total reflection phenomenon analysis in dynamic laser scattering measurements for individual label free cells |
Lasers in Engineering |
31 |
1-2 |
111-127 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1892 |
Gao, Yongchang (1); Jin, Zhongmin (1, 2); Wang, Ling (1); Wang, Manyi (1, 2) |
Finite element analysis of sliding distance and contact mechanics of hip implant under dynamic walking conditions |
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Med |
229 |
6 |
469-474 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1893 |
Zhang, Xingwu (1); Chen, Xuefeng (1); You, Shangqin (2); He, Zhengjia (1) |
Active control of dynamic frequency responses for shell structures |
JVC/Journal of Vibration and Control |
21 |
14 |
2813-2824 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xian Jiaotong University, Xian, China |
2015 |
| 1894 |
Ardestani, Marzieh M. (1); Moazen, Mehran (2); Maniei, Ehsan (3); Jin, Zhongmin (1, 4) |
Posterior stabilized versus cruciate retaining total knee arthroplasty designs: Conformity affects the performance reliability of the design over |
Medical Engineering and Physics |
37 |
4 |
350-360 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1895 |
Xue, Qi (1); Wang, Zhao (1); Huang, Junhui (1); Gao, Jianmin (1); Qi, Zhaoshuai (1) |
A two-level space-time color-coding method for 3D measurements using structured light |
Measurement Science and Technology |
26 |
11 |
|
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1896 |
Shi, Xiao-Jun (1); Shui, Lin-Qi (1); Gao, Jian-Min (1); Li, Fa-Jing (1) |
Internal cooling passage of mist/steam two-phase flow enhanced cooling gas turbine blade |
Hangkong Dongli Xuebao/Journal of Aerospace Power |
30 |
11 |
2561-2567 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1897 |
Zhang, Lu (1); Qin, Yuwei (1, 2); Li, Kai-Xing (1); Zhao, Xin (1); Xing, Yun-Fei (1); Zhao, Hong (1); Jiang, Zhuangde (1); Chen, Wei (3); Yao, Nian-Ling (4); Yuan, Li (3) |
Light scattering properties in spatial planes for label free cells with different internal structures |
Optical and Quantum Electronics |
47 |
5 |
1005-1025 |
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n; Shaanxi, China |
2015 |
| 1898 |
Zhang, Weiyuan (1, 2); Xing, Keyi (1); Li, Junmin (3); Chen, Minglai (3) |
Adaptive synchronization of delayed reaction-diffusion FCNNs via learning control approach |
Journal of Intelligent and Fuzzy Systems |
28 |
1 |
141-150 |
State Key Laboratory for Manufacturing System Engineering, System Engineering Institute, Xi'an Jiaotong University, Xi'an Shaanxi, China |
2015 |
| 1899 |
Li, Yang (1); Zhao, Wanhua (1); Lan, Shuhuai (2); Ni, Jun (2); Wu, Wenwu (1); Lu, Bingheng (1) |
A review on spindle thermal error compensation in machine tools |
International Journal of Machine Tools and Manufacture |
95 |
|
20-38 |
State Key Laboratory for Manufacturing System Engineering, Xi'An Jiaotong University, No. 99 Yanxiang Road, Yanta District, Xi'an, Shaanxi Province, China |
2015 |
| 1900 |
Cheng, Wei (1); Zhang, Zhousuo (1); Zhang, Jie (1); Lu, Jiantao (1) |
Acoustical source tracing using independent component analysis and correlation analysis |
Shock and Vibration |
2015 |
|
|
State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1901 |
Liu, Bin (1); Jiang, Gedong (1); Wang, Wenjun (1); Mei, Xuesong (1); Wang, Kedian (1); Cui, Jianlei (1); Wang, Jiuhong (1) |
Porous microstructures induced by picosecond laser scanning irradiation on stainless steel surface |
Optics and Lasers in Engineering |
78 |
|
55-63 |
State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, China |
2016 |
| 1902 |
Wang, Wei (1, 2); Zhou, Cheng (2); Yang, Yun (2); Wang, Xiaojun (2); Qu, Jue (2) |
Flexible rope simulation based on improved mass-spring mode |
Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphi |
27 |
11 |
2230-2236 |
State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1903 |
Guo, Zheng (1); Mao, Shi-Min (1); Li, Xiao-E (2); Ren, Zhong-Yi (1) |
Research on the theoretical tooth profile errors of gears machined by skiving |
Mechanism and Machine Theory |
97 |
|
1-11 |
State Key Laboratory for Manufacturing System Engineering, Xi'An Jiaotong University, Xi'an, China; |
2016 |
| 1904 |
Cheng, Rongjun (1); Li, Cun (1); Zhao, Yulong (1); Li, Bo (1); Tian, Bian (1) |
A high performance micro-pressure sensor based on a double-ended quartz tuning fork and silicon diaphragm in atmospheric packaging |
Measurement Science and Technology |
26 |
6 |
|
State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1905 |
Li, Cun (1); Zhao, Yulong (1); Cheng, Rongjun (1); Yu, Zhongliang (1); Liu, Yan (1) |
A resonant sensor composed of quartz double ended tuning fork and silicon substrate for digital acceleration measurement |
Review of Scientific Instruments |
85 |
3 |
|
State Key Laboratory for Manufacturing System Engineering, Xi'An Jiaotong University, Xi'an, Shannxi 710049, China |
2014 |
| 1906 |
Shi, Xiaojun (1); Shui, Linqi (2); Tao, Xiaobing (1); Gao, Jianmin (1); Li, Fajing (1) |
Heat transfer experimental investigation of mist/steam or steam within gas turbine blade internal cooling passage |
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering |
35 |
12 |
3061-3067 |
State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an; Shaanxi Province, China |
2015 |
| 1907 |
Wang, Lanlan (1); Liu, Hongzhong (1); Jiang, Weitao (1); Li, Rui (1); Li, Fang (1); Yang, Zhongbo (2); Yin, Lei (1); Shi, Yongsheng (1); Chen, Bangdao (1) |
Capillary number encouraged the construction of smart biomimetic eyes |
Journal of Materials Chemistry C |
3 |
23 |
5896-5902 |
State Key Laboratory for Manufacturing Systems Engineer, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1908 |
Wang, H. (1); Fu, G. (1); Xiao, L. (1); Chen, H. (1); Xiao, H. (1) |
Accuracy of the subsurface damage parameters calculated by the finite difference algorithm |
Journal of the European Optical Society |
10 |
|
|
State Key Laboratory for Manufacturing Systems Engineering Mechanical Engineering School, Xi鈥檃n Jiaotong UniversityXi鈥檃n, Shaanxi, China |
2015 |
| 1909 |
Li, Zhikang (1, 2); Zhao, Libo (1, 2); Jiang, Zhuangde (1); Ye, Zhiying (1); Dai, Lu (3); Zhao, Yulong (1) |
Mechanical behavior analysis on electrostatically actuated rectangular microplates |
Journal of Micromechanics and Microengineering |
25 |
3 |
|
State Key Laboratory for Manufacturing Systems Engineering, Collaborative Innovation Center of Suzhou Nano Science and Technology, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1910 |
Du, Guangqing (1); Yang, Qing (1); Chen, Feng (1); Lu, Yu (1); Bian, Hao (1); Yong, Jiale (1); Hou, Xun (1) |
Localized surface plasmon resonances in core-embedded heterogeneous nano-bowtie antenna |
Applied Physics B: Lasers and Optics |
120 |
1 |
47-51 |
State Key Laboratory for Manufacturing Systems Engineering, Key Laboratory of Photonics Technology for Information, School of Electronics and Information Engineering, Xi鈥檃n Jiaotong University, Xi |
2015 |
| 1911 |
Du, Guangqing (1); Yang, Qing (1); Chen, Feng (1); Lu, Yu (1); Wu, Yanmin (1); Ou, Yan (1); Hou, Xun (1) |
Tuning near-field enhancements on an off-resonance nanorod dimer via temporally shaped femtosecond laser |
Journal of Physics D: Applied Physics |
48 |
43 |
|
State Key Laboratory for Manufacturing Systems Engineering, Key Laboratory of Photonics Technology for Information, School of Electronics and Information Engineering, Xi'An Jiaotong University, Xi'an |
2015 |
| 1912 |
Ou, Yan (1); Yang, Qing (1); Du, Guangqing (1); Chen, Feng (1); Wu, Yanmin (1); Lu, Yu (1); Hou, Xun (1) |
Ultrafast thermalisation dynamics in an Au film excited by a polarization-shaped femtosecond laser double-pulse |
Optics and Laser Technology |
70 |
|
71-75 |
State Key Laboratory for Manufacturing Systems Engineering, Key Laboratory of Photonics Technology for Information, Xi'An Jiaotong University, China |
2015 |
| 1913 |
Cao, Junyi (1, 2); Zhou, Shengxi (1); Inman, Daniel J. (2); Lin, Jing (1) |
Nonlinear dynamic characteristics of variable inclination magnetically coupled piezoelectric energy harvesters |
Journal of Vibration and Acoustics, Transactions of the ASME |
137 |
2 |
|
State Key Laboratory for Manufacturing Systems Engineering, Research Institute of Diagnostics and Cybernetics, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 1914 |
Du, Guangqing (1); Yang, Qing (1); Chen, Feng (1); Ou, Yan (1); Wu, Yanmin (1); Hou, Xun (1) |
Ultrafast dynamics of laser thermal excitation in gold film triggered by temporally shaped double pulses |
International Journal of Thermal Sciences |
90 |
|
197-202 |
State Key Laboratory for Manufacturing Systems Engineering, School of Electronics and Information Engineering, Xi'An Jiaotong University, China |
2015 |
| 1915 |
Du, Guangqing (1); Yang, Qing (1); Chen, Feng (1); Wu, Yanmin (1); Ou, Yan (1); Lu, Yu (1); Hou, Xun (1) |
Ultrafast thermalization dynamics in two-layer metal films excited by temporally shaped femtosecond laser |
International Journal of Heat and Mass Transfer |
87 |
|
341-346 |
State Key Laboratory for Manufacturing Systems Engineering, School of Electronics and Information Engineering, Xi'An Jiaotong University, China |
2015 |
| 1916 |
Li, Yiqing (1); Wang, Yu (1); Zi, Yanyang (1); Zhang, Mingquan (1) |
An enhanced data visualization method for diesel engine malfunction classification using multi-sensor signals |
Sensors (Switzerland) |
15 |
10 |
26675-26693 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi’an Jiaotong University, No. 28 Xianning West Road, Xi’an, China |
2015 |
| 1917 |
Wang, Bin (1); Xu, Jun (1); Cao, Binggang (1); Zhou, Xuan (2) |
A novel multimode hybrid energy storage system and its energy management strategy for electric vehicles |
Journal of Power Sources |
281 |
|
432-443 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1918 |
Zhou, Shengxi (1, 2); Cao, Junyi (1); Inman, Daniel J. (2); Liu, Shengsheng (1); Wang, Wei (1); Lin, Jing (1) |
Impact-induced high-energy orbits of nonlinear energy harvesters |
Applied Physics Letters |
106 |
9 |
|
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1919 |
Hao, Xiuqing (1, 2); Wang, Li (1); Lv, Danhui (1); Wang, Quandai (3); Li, Liang (2); He, Ning (2); Lu, Bingheng (1) |
Fabrication of hierarchical structures for stable superhydrophobicity on metallic planar and cylindrical inner surfaces |
Applied Surface Science |
325 |
C |
151-159 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1920 |
Shi, X.J. (1); Gao, J.M. (1); Agnew, B. (2); Liang, W.Y. (1); Wang, W. (1) |
Experimental and numerical study of an integrated air- and steam-cooled gas turbine vane |
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy |
229 |
3 |
240-255 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1921 |
Guo, Nan (1); Liang, Jin (1); Qian, Bo-Xing (1); Zeng, Li-Wu (1) |
Research on full-field measurement of large deformation of polymer materials |
Guangdianzi Jiguang/Journal of Optoelectronics Laser |
26 |
3 |
494-499 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1922 |
Zhou, Shengxi (1); Cao, Junyi (1); Wang, Wei (1); Liu, Shengsheng (1); Lin, Jing (1) |
Modeling and experimental verification of doubly nonlinear magnet-coupled piezoelectric energy harvesting from ambient vibration |
Smart Materials and Structures |
24 |
5 |
|
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1923 |
Chen, Zhenxian (1); Zhang, Xuan (1); Ardestani, Marzieh M. (1); Wang, Ling (1); Liu, Yaxiong (1); Lian, Qin (1); He, Jiankang (1); Li, Dichen (1); Jin, Zhongmin (1, 2) |
Prediction of in vivo joint mechanics of an artificial knee implant using rigid multi-body dynamics with elastic contacts |
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Med |
228 |
6 |
564-575 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xian, Shaanxi, China |
2014 |
| 1924 |
Yang, Jun (1); Zhang, Dongsheng (1); Feng, Bin (1); Mei, Xuesong (1); Hu, Zhenbang (1) |
Thermal-Induced Errors Prediction and Compensation for a Coordinate Boring Machine Based on Time Series Analysis |
Mathematical Problems in Engineering |
2014 |
|
|
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, No.28, Xianning West Road, Xi'an, China |
2014 |
| 1925 |
Zhang, Xuan (1); Chen, Zhenxian (1); Wang, Ling (1); Yang, Wenjian (1); Li, Dichen (1); Jin, Zhongmin (1, 2) |
Prediction of hip joint load and translation using musculoskeletal modelling with force-dependent kinematics and experimental validation |
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Med |
229 |
7 |
477-490 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1926 |
Guo, Junkang (1); Li, Baotong (1); Liu, Zhigang (1); Hong, Jun (1); Zhou, Qiang (1) |
A new solution to the measurement process planning for machine tool assembly based on Kalman filter |
Precision Engineering |
43 |
|
356-369 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 1927 |
Hao, Xiuqing (1, 2); Pei, Shiyuan (1); Wang, Li (1); Xu, Hua (1); He, Ning (2); Lu, Bingheng (1) |
Microtexture fabrication on cylindrical metallic surfaces and its application to a rotor-bearing system |
International Journal of Advanced Manufacturing Technology |
78 |
5-8 |
1021-1029 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2015 |
| 1928 |
Zhang, Anfeng (1); Qi, Baolu (1); Shi, Bofei (1); Li, Dichen (1) |
Effect of curvature radius on the residual stress of thin-walled parts in laser direct forming |
International Journal of Advanced Manufacturing Technology |
79 |
1-4 |
81-88 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n; Shaanxi, China |
2015 |
| 1929 |
Li, Baotong (1); Hong, Jun (1); Shao, Guoqiang (1); Du, Fei (1) |
An integrated mechanical鈥揺lectrical predictive model of electrical contact resistance between two rough surfaces |
Tribology Transactions |
58 |
3 |
537-548 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2015 |
| 1930 |
Guo, Junkang (1); Liu, Zhigang (1); Li, Baotong (1); Hong, Jun (1) |
Optimal tolerance allocation for precision machine tools in consideration of measurement and adjustment processes in assembly |
International Journal of Advanced Manufacturing Technology |
80 |
9-12 |
1625-1640 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2015 |
| 1931 |
Sun, Tao (1, 2); Liang, Jin (1); Guo, Xiang (1); Ren, Maodong (1); Wang, Lizhong (1) |
Optical Measurement of Forming Limit聽and Formability of Cu/Al Clad Metals |
Journal of Materials Engineering and Performance |
24 |
4 |
1426-1433 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n; Shanxi, China |
2015 |
| 1932 |
Yan, Suna (1); Li, Baotong (1); Hong, Jun (1) |
Bionic design and verification of high-precision machine tool structures |
International Journal of Advanced Manufacturing Technology |
81 |
1-4 |
73-85 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2015 |
| 1933 |
Wang, Bin (1); Xu, Jun (1); Cao, Binggang (1); Li, Qiyu (1); Yang, Qingxia (1) |
Compound-type hybrid energy storage system and its mode control strategy for electric vehicles |
Journal of Power Electronics |
15 |
3 |
849-859 |
State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi鈥檃n Jiaotong University, Xi鈥檃n, China |
2015 |
| 1934 |
Yong, Jiale (1); Yang, Qing (1); Chen, Feng (1); Zhang, Dongshi (1); Du, Guangqing (1); Si, Jinhai (1); Yun, Feng (1); Hou, Xun (1) |
A bioinspired planar superhydrophobic microboat |
Journal of Micromechanics and Microengineering |
24 |
3 |
|
State Key Laboratory for Manufacturing Systems Engineering, Shannxi Key Lab of Information Photonic Technique, Xi'An Jiaotong University, No 28 Xianning West Road, Xi'an-710049, China |
2014 |
| 1935 |
Feng, Zu-Ren (1); Zhou, Qing (1); Zhang, Jun (1); Jiang, Ping (2); Yang, Xue-Wen (1) |
A target guided subband filter for acoustic event detection in noisy environments using wavelet packets |
IEEE/ACM Transactions on Speech and Language Processing |
23 |
2 |
361-372 |
State Key Laboratory for Manufacturing Systems Engineering, Systems Engineering Institute, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1936 |
Lu, Na (1); Li, Tengfei (1); Pan, Jinjin (1); Ren, Xiaodong (1); Feng, Zuren (1); Miao, Hongyu (2) |
Structure constrained semi-nonnegative matrix factorization for EEG-based motor imagery classification |
Computers in Biology and Medicine |
60 |
|
32-39 |
State Key Laboratory for Manufacturing Systems Engineering, Systems Engineering Institute, Xi'an Jiaotong University, Xi'an, Shaanxi, China |
2015 |
| 1937 |
Luo, Jianchao (1); Xing, Keyi (1); Zhou, Mengchu (2, 3); Li, Xiaoling (1); Wang, Xinnian (1) |
Deadlock-free scheduling of automated manufacturing systems using petri nets and hybrid heuristic search |
IEEE Transactions on Systems, Man, and Cybernetics: Systems |
45 |
3 |
530-541 |
State Key Laboratory for Manufacturing Systems Engineering, Systems Engineering Institute, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1938 |
Xiong, Meng (1); Gao, Feng (1); Liu, Kun (1); Chen, Siyun (1); Dong, Jiaojiao (1) |
Optimal real-time scheduling for hybrid energy storage systems and wind farms based on model predictive control |
Energies |
8 |
8 |
8020-8051 |
State Key Laboratory for Manufacturing Systems Engineering, Systems Engineering Institute, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1939 |
Jia, Feng (1); Lei, Yaguo (1); Shan, Hongkai (1); Lin, Jing (1) |
Early fault diagnosis of bearings using an improved spectral kurtosis by maximum correlated kurtosis deconvolution |
Sensors (Switzerland) |
15 |
11 |
29363-29377 |
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, No. 28 Xianning West Road, Xi’an, China |
2015 |
| 1940 |
Cheng, Wei (1); Zhang, Zhousuo (1); Zhang, Jie (1) |
Acoustical source separation and identification using principal component analysis and correlation analysis |
Journal of Vibroengineering |
17 |
4 |
1817-1827 |
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an, China |
2015 |
| 1941 |
Miao, Baogang (1); Peng, Niancai (1); Li, Lei (1); Li, Zheng (1); Hu, Fei (1); Zhang, Zengming (1); Wang, Chaohui (1) |
Centrifugal microfluidic system for nucleic acid amplification and detection |
Sensors (Switzerland) |
15 |
11 |
27954-27968 |
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an, China |
2015 |
| 1942 |
Liu, Hongzhong (1); Zhu, Shuya (1); Jiang, Weitao (1) |
Rapid flame synthesis of multilayer graphene on SiO<inf>2</inf>/Si substrate |
Journal of Materials Science: Materials in Electronics |
27 |
3 |
2795-2799 |
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an, China |
2016 |
| 1943 |
Chen, Jian (1); Wang, Yiqing (1); Kuang, Xinbin (1); Zhang, Teng (1); Liu, Hongzhong (1); Lu, Bingheng (1); Xu, Minglong (2) |
Vibration characteristics of NiTi-Al MMC beam fabricated with ultrasonic welding |
Smart Materials and Structures |
24 |
12 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University (XJTU), No.28 Xianning West Road, Xi'an, Shanxi, China; |
2015 |
| 1944 |
Wei, Wenming (1); Zhang, Jun (1); Lu, Dun (1); Zhao, Wanhua (1) |
Effect of tilting angle on the dynamics of tilting table driven by worm and worm wheel |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Enginee |
229 |
10 |
1782-1791 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, 405 West Building 5, 99# Yanxiang Road, Yanta District, Xi'an, ShaanXi, China |
2015 |
| 1945 |
Tian, X. (1); Li, D. (1); Lu, B. (1) |
Additive manufacturing: Controllable fabrication for integrated micro and macro structures |
Journal of Ceramic Science and Technology |
5 |
4 |
261-268 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, China |
2014 |
| 1946 |
Cheng, Wei (1, 2); Zhang, Zhousuo (1); Lee, Seungchul (2); He, Zhengjia (1) |
Investigations of denoising source separation technique and its application to source separation and identification of mechanical vibration signal |
JVC/Journal of Vibration and Control |
20 |
14 |
2100-2117 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, China |
2013 |
| 1947 |
Jia, Feng (1); Lei, Yaguo (1); Lin, Jing (1); Zhou, Xin (1); Lu, Na (1) |
Deep neural networks: A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data |
Mechanical Systems and Signal Processing |
72-73 |
|
303-315 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, No. 28 Xianning West Road, Xi'an, China |
2016 |
| 1948 |
Xu, Liang (1); Wang, Wei (2); Gao, Tieyu (3); Shi, Xiaojun (1); Gao, Jianmin (1); Liang, Wanyin (1) |
Experimental study on cooling performance of a steam-cooled turbine blade with five internal cooling smooth channels |
Experimental Thermal and Fluid Science |
58 |
|
180-187 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, No. 28, Xianning West Road, Xi'an, Shaanxi, China |
2014 |
| 1949 |
Du, Fei (1); Li, Baotong (1); Zhang, Jie (2); Zhu, Quan Min (3); Hong, Jun (1) |
Ultrasonic measurement of contact stiffness and pressure distribution on spindle-holder taper interfaces |
International Journal of Machine Tools and Manufacture |
97 |
|
18-28 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, No. 99 Yanxiang Road, Xi'an, China |
2015 |
| 1950 |
Liu, Bingcai (1, 2); Li, Bing (1); Tian, Ailing (2); Yang, Haoyu (2); Gao, Fen (1, 2); Chen, Lei (1) |
Characterisation of a large aperture steep concave parabolic mirror using SASI based on auto-collimation theory |
Measurement Science and Technology |
26 |
1 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, No.28, Xianning West Road, Xi'an, Shaanxi, China |
2015 |
| 1951 |
Kai, Sun (1, 2); Jianmin, Gao (1); Zhiyong, Gao (1); Hongquan, Jiang (1); Xu, Gao (1) |
Plant-wide quantitative assessment of a process industry system's operating state based on color-spectrum |
Mechanical Systems and Signal Processing |
60 |
|
644-655 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, School of Mechanical Engineering, Xian Ning West Road No. 28, Xi'an, Shaanxi, China |
2015 |
| 1952 |
Lu, Dun (1); Zhao, Wanhua (1); Lu, Bingheng (1); Zhang, Jun (1) |
The maximum dynamic eccentricity ratio of hydrodynamic rolling hybrid bearings |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribol |
229 |
2 |
168-177 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, West No. 5 Building, Xi'an, China |
2015 |
| 1953 |
Wei, Wenming (1); L, Dun (1); Zhang, Jun (1); Zhao, Wanhua (1) |
Static stiffness of three-row cylindrical roller bearing for rotary table |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
48 |
12 |
8-14 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an , China |
2014 |
| 1954 |
Chi, Jinchun (1); Zhang, Anfeng (1); Xie, Shixing (1); Jin, Cheng (2) |
Process optimization and residual stress measurement for arc spraying rapid tooling |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
48 |
12 |
126-130 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an , China |
2014 |
| 1955 |
Niu, Linkai (1); Cao, Hongrui (1); He, Zhengjia (1); Li, Yamin (1) |
Dynamic modeling and vibration response simulation for high speed rolling ball bearings with localized surface defects in raceways |
Journal of Manufacturing Science and Engineering, Transactions of the ASME |
136 |
4 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China |
2014 |
| 1956 |
Jing, Weixuan (1); Zhou, Fan (1); Chen, Lujia (1); Qi, Han (1); Jiang, Zhuangde (1); Wang, Bing (1); Niu, Lingling (1) |
Glucose sensor of spirally hierarchical structure with ZnO nanowires synthesized on a spiralled Au fiber |
Gaodeng Xuexiao Huaxue Xuebao/Chemical Journal of Chinese Universities |
35 |
3 |
493-498 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China |
2014 |
| 1957 |
Zhang, Huijie (1); Liu, Hui (1); Du, Chao (1); Zhang, Jun (1); Zhao, Wanhua (1) |
Research on the variation rule of the dynamic characteristics of a vertical feed system without counterweight |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
50 |
7 |
176-183 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China |
2014 |
| 1958 |
Lin, Qi-Yin (1); Wei, Zheng-Ying (1); Wang, Ning (1); Chen, Wei (1) |
Effects of texture slip surface on load-carrying capacity and cavitation of bearing |
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) |
41 |
11 |
85-90 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, Shaanxi, China |
2013 |
| 1959 |
Li, Xiang (1, 2); Yang, Zhibo (1, 2); Zhang, Han (1, 2); Du, Zhaohui (1, 2); Chen, Xuefeng (1, 2) |
Crack growth sparse pursuit for wind turbine blade |
Smart Materials and Structures |
24 |
1 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1960 |
Wang, Shibin (1, 2); Cai, Gaigai (2); Zhu, Zhongkui (1, 2); Huang, Weiguo (2); Zhang, Xingwu (1) |
Transient signal analysis based on Levenberg-Marquardt method for fault feature extraction of rotating machines |
Mechanical Systems and Signal Processing |
54 |
|
16-40 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1961 |
Jing, Weixuan (1); Qi, Han (1); Shi, Jiafan (1); Jiang, Zhuangde (1); Zhou, Fan (1); Cheng, Yanyan (1) |
Construction of 3d arrays of cylindrically hierarchical structures with zno nanorods hydrothermally synthesized on optical fiber cores |
Journal of Nanomaterials |
2014 |
|
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2014 |
| 1962 |
Tao, Long (1); Liu, Zhigang (1); Zhang, Weibo (1); Zhou, Yangli (1) |
Frequency-scanning interferometry for dynamic absolute distance measurement using Kalman filter |
Optics Letters |
39 |
24 |
6997-7000 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2014 |
| 1963 |
He, Jiankang (1); Xu, Fangyuan (1); Cao, Yi (1); Liu, Yaxiong (1); Li, Dichen (1); Jin, Zhongmin (1) |
Electrohydrodynamic direct-writing lithography: An alternative maskless technique for microstructure fabrication |
Applied Physics Letters |
105 |
25 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2014 |
| 1964 |
Jiang, Weitao (1); Niu, Dong (1); Liu, Hongzhong (1); Wang, Chaohui (1); Zhao, Tingting (1); Yin, Lei (1); Shi, Yongsheng (1); Chen, Bangdao (1); Ding, Yucheng (1); Lu, Bin |
Photoresponsive soft-robotic platform: Biomimetic fabrication and remote actuation |
Advanced Functional Materials |
24 |
48 |
7598-7604 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2014 |
| 1965 |
Zhu, Linbo (1); Liu, Zhigang (1); Jiang, Xiangjun (1); Yang, Guoqing (2); Hong, Jun (1) |
Contact pressure model of fastener interface with stress singularities |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
50 |
23 |
89-96 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1966 |
Han, Feng (1); Yang, Shuming (1, 2); Jing, Weixuan (1); Wang, Liangjun (1); Li, Lei (1); Jiang, Zhuangde (1); Gao, Feng (3) |
Effect of Ag thin films on the photoluminescence of ZnO films |
Journal of Nanoscience and Nanotechnology |
15 |
5 |
3796-3801 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1967 |
Diao, Guangzhou (1); Zhao, Liping (1); Yao, Yiyong (2) |
A dynamic quality control approach by improving dominant factors based on improved principal component analysis |
International Journal of Production Research |
53 |
14 |
4287-4303 |
State Key Laboratory for Manufacturing Systems Engineering, Xian Jiaotong University, Xian, China |
2015 |
| 1968 |
Tan, Chao (1); Wei, Zheng-Ying (1); Hu, Fu-Sheng (1); Li, Ben-Qiang (1, 2); Han, Zhi-Hai (3) |
Numerical analysis and experimental study of atmospheric plasma spray process |
Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science) |
48 |
12 |
2284-2292 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1969 |
Yang, Jun (1); Mei, Xuesong (1); Feng, Bin (1); Zhao, Liang (1); Ma, Chi (1); Shi, Hu (1) |
Experiments and simulation of thermal behaviors of the dual-drive servo feed system |
Chinese Journal of Mechanical Engineering (English Edition) |
28 |
1 |
76-87 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1970 |
He, Jiankang (1); Zhang, Wenyou (1, 2); Liu, Yaxiong (1); Li, Xiang (3); Li, Dichen (1); Jin, Zhongmin (1) |
Design and fabrication of biomimetic multiphased scaffolds for ligament-to-bone fixation |
Materials Science and Engineering C |
50 |
|
12-18 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1971 |
Wang, Ling (1); Yang, Wenjian (1); Peng, Xifeng (1); Li, Dichen (1); Dong, Shuangpeng (2); Zhang, Shu (2); Zhu, Jinyu (3); Jin, Zhongmin (1, 4) |
Effect of progressive wear on the contact mechanics of hip replacements - Does the realistic surface profile matter? |
Journal of Biomechanics |
48 |
6 |
1112-1118 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1972 |
Hu, Bingbing (1); Li, Bing (1) |
Blade crack detection of centrifugal fan using adaptive stochastic resonance |
Shock and Vibration |
2015 |
|
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1973 |
Xiao, Wenrong (1, 2); Cheng, Wei (1); Zi, Yanyang (1); Zhao, Chenlu (3); Sun, Chuang (1); Liu, Zhiwen (1); Chen, Jinglong (1); He, Zhengjia (1) |
Support evidence statistics for operation reliability assessment using running state information and its application to rolling bearing |
Mechanical Systems and Signal Processing |
60 |
|
344-357 |
State Key Laboratory for Manufacturing Systems Engineering, Xian Jiaotong University, Xian, China |
2015 |
| 1974 |
Sun, Chuang (1); He, Zhengjia (1); Cao, Hongrui (1); Zhang, Zhousuo (1); Chen, Xuefeng (1); Zuo, Ming Jian (2, 3) |
A non-probabilistic metric derived from condition information for operational reliability assessment of aero-engines |
IEEE Transactions on Reliability |
64 |
1 |
167-181 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1975 |
Xi, Songtao (1); Cao, Hongrui (1); Chen, Xuefeng (1); Zhang, Xingwu (1); Jin, Xiaoliang (2) |
A frequency-shift synchrosqueezing method for instantaneous speed estimation of rotating machinery |
Journal of Manufacturing Science and Engineering, Transactions of the ASME |
137 |
3 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1976 |
Wang, Lei (1); Liu, Haitao (1); Liang, Tao (1); Ma, Xiaobo (1, 2); Zhao, Wanhua (1) |
Modeling and analysis of dynamic response of servo feed system under low frequency excitation |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
51 |
3 |
80-86 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1977 |
Cao, Hongrui (1); Zhou, Kai (1); Chen, Xuefeng (1) |
Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators |
International Journal of Machine Tools and Manufacture |
92 |
|
52-59 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1978 |
Zhang, J. (1, 2); Tao, T. (1); Mei, X. (1); Jiang, G. (1); Zhang, D. (1) |
Non-linear robust control of a voltage-controlled magnetic levitation system with a feedback linearization approach |
Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Contro |
225 |
1 |
85-98 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2011 |
| 1979 |
Wang, Shibin (1); Chen, Xuefeng (1); Wang, Yan (1); Cai, Gaigai (2); Ding, Baoqing (1); Zhang, Xingwu (1) |
Nonlinear squeezing time-frequency transform for weak signal detection |
Signal Processing |
113 |
|
195-210 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1980 |
Qin, Y.-W. (1, 2); Zhao, H. (1); Zhang, L. (1) |
Measurement of lubricant film thickness using Spectral Domain Optical Coherence Tomography (SD-OCT) |
Lasers in Engineering |
31 |
3-4 |
129-139 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1981 |
Jing, Wei-Xuan (1); Cheng, Yan-Yan (1); Qi, Han (1); Jiang, Zhuang-De (1); Zhou, Fan (1); Shi, Jia-Fan (1); Gao, Kun (1) |
Hydrothermal fabrication of ZnO nanorod-based grating patterns with arrays of optical fiber cores as templates |
Superlattices and Microstructures |
82 |
|
124-135 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1982 |
Li, Zhikang (1); Zhao, Libo (1); Jiang, Zhuangde (1); Ye, Zhiying (1); Zhao, Yulong (1) |
An improved method for the mechanical behavior analysis of electrostatically actuated microplates under uniform hydrostatic pressure |
Journal of Microelectromechanical Systems |
24 |
2 |
474-485 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1983 |
Zou, Zhongyue (1); Cao, Junyi (1); Cao, Binggang (1); Chen, Wen (2) |
Evaluation strategy of regenerative braking energy for supercapacitor vehicle |
ISA Transactions |
55 |
|
234-240 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xian, China |
2015 |
| 1984 |
Sun, Kai (1, 2); Gao, Jian-Min (1); Gao, Zhi-Yong (1); Gao, Xu (1); Wang, Zhao (1) |
Plant-wide fault pattern recognition method based on fault-spectrum |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
2 |
519-527 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1985 |
Tian, Xiaoyong (1); Yin, Ming (1); Li, Dichen (1) |
Design and fabrication of gradient index artificial electromagnetic medium based on 3D printing |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
51 |
7 |
124-129 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1986 |
Jiang, Hong-Quan (1); Wang, Jin-Yu (1); Gao, Jian-Min (1); Gao, Zhi-Yong (1); Suo, Hai-Long (1) |
Modeling method for SDG-FG model oriented to fault root causes tracing analysis of complex electromechanical system |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
3 |
749-757 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1987 |
Li, Zheng (1, 2); He, Jiankang (1); Li, Xiang (3, 4); Bian, Weiguo (2); Zhang, Wenyou (1); Li, Dichen (1); Jin, Zhongmin (1); Qiu, Yusheng (2); Snedeker, Jess G. (3, 4) |
Regeneration of anterior cruciate ligament with silk-based scaffold in porcine model |
Journal of Mechanics in Medicine and Biology |
15 |
1 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1988 |
Lin, Qiyin (1); Wei, Zhengying (1); Wang, Ning (1); Chen, Wei (1) |
Effect of large-area texture/slip surface on journal bearing considering cavitation |
Industrial Lubrication and Tribology |
67 |
3 |
216-226 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1989 |
Jie, Wu (1); Zuren, Feng (1); Xiaoru, Song (2) |
Research on image splicing and fusion processing algorithm in large visual field |
Telkomnika (Telecommunication Computing Electronics and Control) |
12 |
4 |
839-846 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1990 |
Jie, Wu (1, 2); Zuren, Feng (1); Lei, Wang (3) |
High recognition ratio image processing algorithm of micro electrical components in optical microscope |
Telkomnika (Telecommunication Computing Electronics and Control) |
12 |
4 |
911-920 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 1991 |
Liu, Peng (1); Wang, Wenjun (1); Mei, Xuesong (1); Liu, Bin (1); Zhao, Wanqin (1) |
Rear-side picosecond laser ablation of indium tin oxide micro-grooves |
Optics and Lasers in Engineering |
69 |
|
35-39 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1992 |
Chen, P. (1); Zhao, Y.L. (1); Tian, B. (1); Li, C. (1); Li, Y.Y. (1) |
A beam-membrane structure micromachined differential pressure flow sensor |
Review of Scientific Instruments |
86 |
4 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1993 |
Ma, Chi (1); Yang, Jun (1); Zhao, Liang (1); Mei, Xuesong (1); Shi, Hu (1) |
Simulation and experimental study on the thermally induced deformations of high-speed spindle system |
Applied Thermal Engineering |
86 |
|
251-268 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1994 |
Lu, Zhongliang (1, 2); Zhou, Jiangping (1, 2); Yang, Dongsheng (1); Jing, Hui (1); Li, Dichen (1) |
Rapid fabrication method of pre-research turbine blade wax precision mould based on 3D printing technology |
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica |
36 |
2 |
651-660 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1995 |
Ye, Guoyong (1); Liu, Hongzhong (1); Fan, Shanjin (1); Li, Xuan (1); Yu, Haoyu (1); Lei, Biao (1); Shi, Yongsheng (1); Yin, Lei (1); Lu, Bingheng (1) |
Precise and robust position estimation for optical incremental encoders using a linearization technique |
Sensors and Actuators, A: Physical |
232 |
|
30-38 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1996 |
Feng, Mingde (1, 2); Tian, Xiaoyong (1); Wang, Jiafu (2); Yin, Ming (1); Qu, Shaobo (2); Li, Dichen (1) |
Broadband abnormal reflection based on a metal-backed gradient index liquid slab: An alternative to metasurfaces |
Journal of Physics D: Applied Physics |
48 |
24 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1997 |
Zhang, XiaoLi (1, 2); Chen, Wei (3); Wang, BaoJian (1); Chen, XueFeng (1) |
Intelligent fault diagnosis of rotating machinery using support vector machine with ant colony algorithm for synchronous feature selection and par |
Neurocomputing |
167 |
|
260-279 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 1998 |
Ye, Guoyong (1); Liu, Hongzhong (1); Fan, Shanjin (1); Li, Xuan (1); Yu, Haoyu (1); Lei, Biao (1); Shi, Yongsheng (1); Yin, Lei (1); Lu, Bingheng (1) |
A theoretical investigation of generalized grating imaging and its application to optical encoders |
Optics Communications |
354 |
|
21-27 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 1999 |
Sun, Bin (1); Li, Bing (1) |
A quantitative error compensation model of the inclination angle of the laser displacement sensor |
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument |
36 |
5 |
996-1004 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2000 |
Sun, Changning (1); Wang, Ling (1); Wang, Zhen (2); Geng, Lei (2); Li, Dichen (1); Sui, Miao (3); Jin, Zhongmin (1) |
Finite element analysis of a retrieved custom-made knee prosthesis |
Journal of Mechanics in Medicine and Biology |
15 |
3 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2001 |
Han, Feng (1); Yang, Shuming (1); Jing, Weixuan (1); Jiang, Zhuangde (1); Liu, Huan (1); Li, Lei (1) |
A study on near-UV blue photoluminescence in graphene oxide prepared by Langmuir-Blodgett method |
Applied Surface Science |
345 |
|
18-23 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 2002 |
Jiang, Hong-Quan (1, 2); Gao, Jian-Min (1); Liang, Ze-Ming (1); Gao, Zhi-Yong (1); Zhang, Xue-Wei (1, 2) |
Pattern recognition of die casting process based on D-S evidence theory |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
5 |
1343-1349 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2003 |
Zhang, Xiaoli (1, 2); Wang, Baojian (1); Chen, Xuefeng (1) |
Intelligent fault diagnosis of roller bearings with multivariable ensemble-based incremental support vector machine |
Knowledge-Based Systems |
89 |
|
56-85 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 2004 |
Yang, Jun (1); Mei, Xue-Song (1); Feng, Bin (1); Ma, Chi (1); Zhao, Liang (1) |
Application of time series analysis in thermal error modeling of motorized spindle |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
5 |
1359-1367 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2005 |
Lian, Qin (1); Chen, Cheng (1); Uwayezu, Marie Chantal (1); Zhang, Weijie (1); Bian, Weiguo (2); Wang, Junzhong (1); Jin, Zhongmin (1, 3) |
Biphasic Mechanical Properties of in vivo Repaired Cartilage |
Journal of Bionic Engineering |
12 |
3 |
473-482 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2006 |
Jiang, Wei (1); Liu, Hongzhong (1); Yin, Lei (1); Shi, Yongsheng (1); Chen, Bangdao (1); Jiang, Weitao (1); Ding, Yucheng (1) |
Fabrication of Enhanced Electron Transport Layer by Laser Scanning Technology for Dye-sensitized Solar Cells |
Electrochimica Acta |
176 |
|
1036-1043 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2007 |
Fan, Zhengjie (1); Wang, Kedian (1); Dong, Xia (1); Duan, Wenqiang (1); Mei, Xuesong (1); Wang, Wenjun (1); Cui, Jianlei (1); Lv, Jing (1) |
Influence of columnar grain microstructure on thermal shock resistance of laser re-melted ZrO2-7wt.% Y2O3 coatings and their failure mechanism |
Surface and Coatings Technology |
277 |
|
188-196 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2008 |
Yu, Haoyu (1); Liu, Hongzhong (1); Li, Xuan (1); Ye, Guoyong (1); Shi, Yongsheng (1); Yin, Lei (1); Jiang, Weitao (1); Chen, Bangdao (1); Liu, Xiaokang (2) |
Calibration of non-contact incremental linear encoders using a macro-micro dual-drive high-precision comparator |
Measurement Science and Technology |
26 |
9 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2009 |
Niu, Linkai (1); Cao, Hongrui (1); He, Zhengjia (1); Li, Yamin (1) |
A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects |
Journal of Sound and Vibration |
357 |
|
207-232 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 2010 |
Zhang, Weibo (1); Liu, Zhigang (1); Zhou, Yangli (1); Gong, Hai (1) |
Tunable diode lasers in littman configuration with synchronous tuning |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
10 |
29-33 and 40 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2011 |
Shao, Guoqiang (1, 2); Zhu, Linbo (1); Hong, Jun (1); Qu, Yunpeng (1); Zhang, Xuefeng (3) |
The factors influencing torque-preload relationship of bolted joints in heavy truck |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
10 |
14-21 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2012 |
Wang, Xinmeng (1); Yang, Jun (1); Mei, Xuesong (1); Lei, Mohan (1); Zhao, Liang (1); Shi, Hu (1) |
Analysis and prediction for thermal error of precision coordinate boring machine |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
10 |
22-28 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2013 |
Liu, Weiqiang (1); Zhang, Jinhua (1); Hong, Jun (1); Zhu, Linbo (1) |
Elastic contact model of elliptical parabolic asperity |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
10 |
34-40 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2014 |
Ma, Chi (1); Yang, Jun (1); Zhao, Liang (1); Mei, Xue-Song (1); Shi, Hu (1); Wang, Xin-Meng (1) |
Thermal characteristics analysis and experimental study on high-speed spindle system |
Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science) |
49 |
11 |
2092-2102 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2015 |
Liu, Hongzhong (1); Zhao, Tingting (1); Jiang, Weitao (1); Jia, Rui (2); Niu, Dong (1); Qiu, Guanglin (3); Fan, Lin (3); Li, Xin (4); Liu, WeihuaProf. (4); Chen, Bangdao (1 |
Flexible Battery-Less Bioelectronic Implants: Wireless Powering and Manipulation by Near-Infrared Light |
Advanced Functional Materials |
25 |
45 |
7071-7079 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2016 |
Cao, Hongrui (1); Xi, Songtao (1); Chen, Xuefeng (1); Wang, Shibin (1) |
Zoom synchrosqueezing transform and iterative demodulation: Methods with application |
Mechanical Systems and Signal Processing |
72-73 |
|
695-711 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 2017 |
Lei, Yaguo (1); Liu, Zongyao (1); Wu, Xionghui (1); Li, Naipeng (1); Chen, Wu (1); Lin, Jing (1) |
Health condition identification of multi-stage planetary gearboxes using a mRVM-based method |
Mechanical Systems and Signal Processing |
60 |
|
289-300 |
State Key Laboratory for Manufacturing Systems Engineering, Xian Jiaotong University, Xian, China |
2015 |
| 2018 |
Wang, Bin (1); Xu, Jun (1); Cao, Binggang (1); Xu, Dan (1); Zou, Zhongyue (1) |
Optimization of energy management system with simulated annealing approach for hybrid power source in electric vehicles |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
8 |
90-96 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2019 |
Cheng, Wei (1); Zhang, Zhousuo (1); He, Zhengjia (1) |
Information criterion-based source number estimation methods with comparison |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
8 |
38-44 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2020 |
Mi, Wei (1); Yan, Ke (1); Wu, Wenwu (1); Hong, Jun (1); Liu, Guanghui (1) |
Transient thermal property analysis for spindle-bearing system considering thermo-deformation coupling |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
8 |
52-57 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2021 |
Wang, Zhen (1); Wang, Yaning (1); Chen, Dong (1); Zheng, Zhaobo (1); Liu, Yaxiong (1); He, Jiankang (1); Wang, Ling (1); Li, Dichen (1); Jin, Zhongmin (1) |
3D printing/imprinting molding process of soft tissue scaffolds |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
8 |
141-146 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2022 |
Sun, Zhichao (1); Tao, Tao (1); Huang, Xiaoyong (1); Mei, Xuesong (1); Wang, Xinmeng (1); Yang, Jun (1); Zhao, Liang (1) |
Modeling and compensation of coupled thermal error of spindle and feed shafts |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
7 |
105-112 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2023 |
Wang, Wei (1); Cao, Junyi (1); Lin, Jing (1); Zhou, Shengxi (1); Cai, Yunlong (1) |
Nonlinear bi-stable energy harvester from human motion |
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University |
49 |
8 |
58-63 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2024 |
Li, Yamin (1); Cao, Hongrui (1); Chen, Xuefeng (1) |
Modelling and vibration analysis of machine tool spindle system with bearing defects |
International Journal of Mechatronics and Manufacturing Systems |
8 |
1-2 |
33-48 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2025 |
Wang, Lanlan (1); Li, Fang (1); Liu, Hongzhong (1); Jiang, Weitao (1); Niu, Dong (1); Li, Rui (1); Yin, Lei (1); Shi, Yongsheng (1); Chen, Bangdao (1) |
Graphene-Based Bioinspired Compound Eyes for Programmable Focusing and Remote Actuation |
ACS Applied Materials and Interfaces |
7 |
38 |
21416-21422 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2026 |
He, Jiankang (1); Chen, Ruomeng (1); Lu, Yongjie (1); Zhan, Li (1); Liu, Yaxiong (1); Li, Dichen (1); Jin, Zhongmin (1) |
Fabrication of circular microfluidic network in enzymatically-crosslinked gelatin hydrogel |
Materials Science and Engineering C |
59 |
|
53-60 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2016 |
| 2027 |
Jing, Weixuan (1); Qi, Han (1); Shi, Jiafan (1); Jiang, Zhuangde (1); Zhou, Fan (1); Cheng, Yanyan (1); Gao, Kun (1) |
Effects of the geometries of micro-scale substrates on the surface morphologies of ZnO nanorod-based hierarchical structures |
Applied Surface Science |
355 |
|
403-410 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 2028 |
Cao, Hongrui (1); Xi, Songtao (1); Cheng, Wei (1) |
Model Updating of Spindle Systems Based on the Identification of Joint Dynamics |
Shock and Vibration |
2015 |
|
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 2029 |
Li, Bing (1); Han, Luofeng (1); Jin, Wei (1); Quan, Shuanglu (1) |
Theoretical and experimental identification of cantilever beam with clearances using statistical and subspace-based methods |
Journal of Computational and Nonlinear Dynamics |
11 |
3 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2030 |
Liu, Yaxiong (1); He, Jiankang (1); Qin, Mian (1); Wang, Ling (1); Jin, Zhongmin (1); Li, Dichen (1) |
Stereolithography & investment casting of custom titanium implants |
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering |
43 |
|
339-342 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2014 |
| 2031 |
Ma, Chi (1); Yang, Jun (1); Mei, Xue-Song (1); Zhao, Liang (1); Wang, Xin-Meng (1); Shi, Hu (1) |
Simulation of thermal behaviors of motorized spindle based on fractal theory and Monte Carlo method |
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University |
49 |
9 |
1324-1331 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2032 |
Zhao, Yulong (1); Li, Cun (1); Hao, Mengmeng (1); Cheng, Rongjun (1); Fan, Xiaole (1); Chen, Pei (1) |
Optical micro-electro-mechanical-system pressure sensor based on light intensity modulation |
Micro and Nano Letters |
10 |
10 |
491-495 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2033 |
Niu, Linkai (1); Cao, Hongrui (1); He, Zhengjia (1) |
Dynamic modeling of rolling ball bearing with localized surface defects considering three dimensional motions and relative slippage |
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering |
51 |
19 |
53-59 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2034 |
Guo, Wei (1); Cao, Hongrui (1); He, Zhengjia (1); Yang, Laihao (1) |
Fatigue Life Analysis of Rolling Bearings Based on Quasistatic Modeling |
Shock and Vibration |
2015 |
|
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China |
2015 |
| 2035 |
Ma, Chi (1); Yang, Jun (1); Mei, Xuesong (1); Zhao, Liang (1); Wang, Xinmeng (1) |
High-speed spindle thermal error modeling based on genetic algorithm and BP neural network |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
10 |
2627-2636 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2036 |
Wei, Wenming (1); Lü, Dun (1); Zhang, Jun (1); Zhao, Wanhua (1) |
Stiffness analysis of bearings in multi-bearing system of tilting table at different attitude |
Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Te |
43 |
10 |
21-25 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China |
2015 |
| 2037 |
Du, Zhaohui (1); Chen, Xuefeng (1); Zhang, Han (1); Yan, Ruqiang (2) |
Sparse Feature Identification Based on Union of Redundant Dictionary for Wind Turbine Gearbox Fault Diagnosis |
IEEE Transactions on Industrial Electronics |
62 |
10 |
6594-6605 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2038 |
Liu, Bingcai (1, 2); Li, Bing (1); Tian, Ailing (2); Gao, Fen (1) |
Compensation and identification of non-common path error in lateral shearing interferometry |
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering |
44 |
8 |
2406-2410 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2039 |
Ding, Hao (1); Gao, Feng (1); Liu, Kun (1); Guan, Xiaohong (2); Wu, Jiang (2) |
An economic dispatch model in an industrial microgrid with wind power based on robust optimization |
Dianli Xitong Zidonghua/Automation of Electric Power Systems |
39 |
17 |
160-167 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2040 |
Jiang, Hongquan (1, 2); Wang, Jinyu (1); Gao, Zhiyong (1); Gao, Jianmin (1); Liang, Zeming (1) |
Data module creation of IETM based on polychromatic sets |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
6 |
1536-1545 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2041 |
Jiang, Pingyu (1); Ding, Kai (1); Leng, Jiewu (1); Cao, Wei (2) |
Service-driven social manufacturing paradigm |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS |
21 |
6 |
1637-1649 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2042 |
Cao, Junyi (1); Wang, Wei (1); Zhou, Shengxi (1, 2); Inman, Daniel J (2); Lin, Jing (1) |
Nonlinear time-varying potential bistable energy harvesting from human motion |
Applied Physics Letters |
107 |
14 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China; |
2015 |
| 2043 |
Yuan, Yu (1, 2); Zhao, Xing (2); Fei, Jiyou (2); Zhao, Yulong (1); Wang, Jiahui (2) |
Study on fault diagnosis of rolling bearing based on time-frequency generalized dimension |
Shock and Vibration |
2015 |
|
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2044 |
Jing, W.X. (1); Zhou, F. (1); Gao, W.Z. (1); Jiang, Z.D. (1); Ren, W. (2); Shi, J.F. (1); Cheng, Y.Y. (1); Gao, K. (1) |
Regulating the hydrothermal synthesis of ZnO nanorods to optimize the performance of spirally hierarchical structure-based glucose sensors |
RSC Advances |
5 |
105 |
85988-85995 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China; |
2015 |
| 2045 |
Wang, Yi-Qing (1); Zhang, Teng (1); Kuang, Xin-Bin (1); Lu, Bing-Heng (1); Hong, Jun (1); Xu, Ming-Long (2) |
Theoretical and experimental research of frequency tuning characteristics of NiTi-Al MMCs beam |
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University |
49 |
9 |
1300-1305 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2046 |
Wang, Hairong (1, 2); Wang, Jiaxin (1, 2); Chen, Lei (1, 2); Yao, Yuqing (1, 2); Sun, Quantao (1, 2); Qunming, Zhang (1, 2) |
Integrated microoxygen sensor based on nanostructured TiO<inf>2</inf>thin films |
Micro and Nano Letters |
10 |
10 |
597-602 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2047 |
Liang, Tao (1); Lu, Dun (1); Yang, Xiaojun (1); Zhang, Jun (1); Ma, Xiaobo (2); Zhao, Wanhua (1) |
Feed fluctuation of ball screw feed systems and its effects on part surface quality |
International Journal of Machine Tools and Manufacture |
101 |
|
1-9 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China; |
2016 |
| 2048 |
Li, Naipeng (1); Lei, Yaguo (1); Lin, Jing (1); Ding, Steven X. (2) |
An Improved Exponential Model for Predicting Remaining Useful Life of Rolling Element Bearings |
IEEE Transactions on Industrial Electronics |
62 |
12 |
7762-7773 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2015 |
| 2049 |
Zhu, Linbo (1); Hong, Jun (1); Jiang, Xiangjun (1, 2) |
On controlling preload and estimating anti-loosening performance in threaded fasteners based on accurate contact modeling |
Tribology International |
95 |
|
181-191 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, China; |
2016 |
| 2050 |
Xiao, Hong (1); Li, Luyi (2) |
Discussion of paper by Matieyendou Lamboni, Hervé Monod, David Makowski ""Multivariate sensitivity analysis to measure global contribution |
Reliability Engineering and System Safety |
147 |
|
194-195 |
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, China; |
2016 |
| 2051 |
Huang, Junhui (1); Wang, Zhao (1); Xue, Qi (1); Gao, Jianmin (1) |
Calibration of camera with rational function lens distortion model |
Zhongguo Jiguang/Chinese Journal of Lasers |
41 |
5 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China |
2014 |
| 2052 |
Zhao, Zixin (1); Zhao, Hong (1); Zhang, Lu (1); Gao, Fen (2); Qin, Yuwei (3); Du, Hubing (4) |
2D phase unwrapping algorithm for interferometric applications based on derivative Zernike polynomial fitting technique |
Measurement Science and Technology |
26 |
1 |
|
State Key Laboratory for Manufacturing Systems Engineering, Xi'An Jiaotong University, Xi'an, Shaanxi, China |
2014 |
