李兵,男,1965年10月29日出生,中共党员
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1984年9月--1988年7月于西安交通大学电气工程系工业自动化专业学习,并获得工学学士学位。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1988年9月--1991年6月于西安交通大学机械工程系流体传动及控制专业学习,并获工学硕士学位。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1991年6月于西安交通大学机械系微型技术教研室任教,1993年11月被评为讲师,2002年8月被聘为西安交
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 通大学机械工程学院副教授,现任机械工程学院精密工程研究所副所长,国家教育部快速成型制造技术工
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 程研究中心副主任等职。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 目前主要从事光电检测,逆向工程,运程测量服务以及自动控制方面的研究工作。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 主持项目:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1、 基于多线结构光三维轮廓快速测量系统的研究,国家自然科学基金(50275120)(进行中)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2、 基于无衍射光束的高精度三维轮廓测量仪的研制,国家重点实验室开放基金(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 3、 多光刀准全场三维轮廓测量系统应用理论研究,陕西省自然科学基金(2001C43)(进行中)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 4、 高精度三维轮廓测量系统的研制,横向课题(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 5、 基于无衍射光束的高精度三维轮廓测量仪,西安交大机械学院青年基金(已完成)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 主要参加(第一参加人)项目:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1、 高精度三维物体轮廓测量系统,陕西省科技攻关项目(2000K08―G22)(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2、 扫描器部件的相关检测设备,国防重点项目(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 3、复杂曲面多光刀快速测量及数据重构集成系统的应用开发,市科技局重大创新工程
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) (CX200206) (进行中)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 4、 电脑硬质合金钻头齿自动分选机,横向课题(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 5、 钻头牙轮专用测量仪,横向课题(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 参加项目:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1、 关中高新技术产业带CIMS开发与应用,国家高技术研究发展计划(863计划)(2002AA414060)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) (进行中)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2、 国家教育部快速成型制造技术工程研究中心,教育部项目(进行中)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 3、 国家教育振兴行动计划重点项目分项目(已完成)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 4、 邮包尺寸检测装置的传送平台和光学测头研究,邮电部科技项目(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 5、激光全息照相制版研究,横向课题(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 6、大型三维物体形状测量技术研究,横向课题(已完成)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 7、西安交大-韩国三星MEMS联合实验室,国际合作(进行中)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 并参与了校“行动计划”和“十五”211的科研工作。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 成果鉴定:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2001年3月2日,由蒋庄德教授主持的陕西省科技攻关项目:高精度三维物体轮廓测量系统(2000K08―G22
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) )通过了由陕西省科技厅主持的科学技术成果鉴定,专家认为本系统的综合指标达到国际先进水平。(第
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 二完成人)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 获奖:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1、2002年7月获陕西省教育厅科技进步一等奖(第二完成人)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2、2002年9月获西安交通大学科技进步一等奖(第二完成人)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 3、2003年3月获陕西省科技进步一等奖(第二完成人)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 4、2003年7月获陕西省教育厅科技进步二等奖(第五完成人)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 专利:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1、 多光刀准全场非接触三维轮廓测量仪,实用新型,专利号:ZL 01 2 12954.2(第二申请人)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2、 便携式光栅投影三维轮廓测量仪,实用新型,申请号:02292534.1(第二申请人)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 3、 激光线扫描三维测量双光刀虚拟网格映射标定方法及装置,发明专利,申请号:01131816.3(第
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 二发明人)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 注:此项发明专利已进入实质性审查阶段。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 4、一种多截面合成三维形面测量方法,发明专利,申请号:03134343.0(第四发明人)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 文章:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 1. “伺服阀前油液压力脉动及其因果研究”,机床与液压,1994年第3期(总第129期)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2.“提高电液位置伺服系统动态响应的措施”,机床与液压,1995年第3期(总第135期)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 3. “The Research of Route Planning in the Measurement of 3-D Profile”,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 17th International Conference Computer Aided Production Engineering(CAPE’2001,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Wuhan).393-396 (ISTP)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 4. “A Virtual Environment for Networked-based Rapid Product Development”,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2001 International Conference on eCommerce Engineering:
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) New Challenges for Global Manufacturing in the
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 21st Century (Proceedings of ICeCE 2001,Xi’an).
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 5. “高精度三维轮廓测量仪的研究”, Proceedings of the Second Cross-Strait Workshop on
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Manufacturing Technology, September 3-5,2001,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 33-40(第二届海峡两岸制造技术研讨会,2001年9月,大连.)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 6. “Application of Multi Light-knife in the
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Measurement of 3D Profile”,International Manufacturing Leaders Forum 2002,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) leadership of the Future in Manufacturing.
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) (IMLF-2002, Adlaide, Australia),119-123
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 7. “Analysis of the Measurement Accuracy in the Multi Light-knife Laser Scanning System”
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) ,2st international Symposium on Instrumentation Science and Technology,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) ISIST’2002 ,Aug.18~22,2002, (2-381~2-385)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Jinan, China (ISTP)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 8. “Calibration of 3-D Profile Measuring System”,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2st international Symposium on Instrumentation Science and Technology,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) ISIST’2002 ,Aug.18~22,2002,(2-518~2-522)Jinan, China (ISTP)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 9. “Integrated Curves Measuring and Reverse Engineering System with Laser Scanning System
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) ”,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 2st international Symposium on Instrumentation Science and Technology,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) ISIST’2002 , Aug.18~22,2002, (2-560~2-564)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Jinan, China (ISTP)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 10.“基于NURBS曲线的激光光刀图像中心提取方法的研究”,中国激光。(已录用)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 11.“基于误差补偿的虚拟网格二维映射标定法”,西安交大学报,2003年3月第37卷第3期325-327。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 12.“多光刀三维轮廓快速测量方法的研究”,光子学报,2003年6月第32卷第6期738-741(
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) EI:03317581225)。
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 13.“图像分割技术在多光刀三维测量系统中的应用”,制造技术与机床。(已录用)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 14.“Measurement of three-dimensional profiles with Multi Structure Linear Lighting”,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Robotics and Computer Integrated Manufacturing,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Vol. 19 Iss.6,2003,12(SCI,EI收录源)
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 15.“Study on Instantaneous Measurement of 3D Profile by Grating Grey Code”,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) ISMTII2003,Nov.28�Dec.1 ,HongKong
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 16.“Surface Reconstruction on the base of Laser Scan Data”,ISMTII2003,
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) Nov.28�Dec.1 ,HongKong
(科技在线,版权所有,未经许可,请勿转载 http://www.xjtust.com) 等十余篇。
|